+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: General (https://forum.logicmachine.net/forumdisplay.php?fid=2)
+--- Thread: New FW for SE is out (/showthread.php?tid=2709)
New FW for SE is out - Daniel - 02.07.2020
Hi All
Just to let you know that fw 2.5.0 for wiser for knx(homeLYnk) and spaceLYnk is out, you should find it on se.com
BR
RE: New FW for SE is out - Erwin van der Zwart - 02.07.2020
Hi,
If you have a HW1 and use the Wiser for KNX remote app just wait with updating as we are investigating the VPN connection...
If you have HW2/3 your good to go (:
BR,
Erwin
RE: New FW for SE is out - Erwin van der Zwart - 05.07.2020
Update: Fix for HW1 VPN connection will be released as .lmup update, so you can upgrade with this firmware and when you experience a issue to the Wiser for KNX remote app you might need to run this update.
BR,
Erwin
RE: New FW for SE is out - AlexLV - 05.07.2020
Thank you Erwin for info here, just on last Friday I updated SL (HW2) to latest version. Will wait update.
BR,
Alexander
RE: New FW for SE is out - Erwin van der Zwart - 05.07.2020
Hi,
HW2 does not require a update, VPN issue only applies to HW1 (older homeLYnk HW).
Next to that it does not apply to any SL HW as Wiser for KNX remote can’t be used on a SL (:
BR,
Erwin
RE: New FW for SE is out - iPedro - 06.07.2020
Hi guys,
I am new to the forum so I hope I am not asking question in the wrong place.
I have tried to upgrade my HL HWv1.2 to the FW2.5.0 from 2.4.0., but even if there is no error msg and process seems to be running fine on the end I am still on FW 2.4.0 - any advice ?
I should probably also mentioned that one of the reasons for me to run the upgrade is that I am facing issue with the HL that after a restart all changes or stored e.g. scripts disapears and go back to state of mid Feb.
Not sure if the two problems are linked, but would be greatfull for suggestion how to proceed.
Many thanks
Pedro
edit: I did click the "Sync project data"
RE: New FW for SE is out - Daniel - 06.07.2020
(06.07.2020, 12:27)iPedro Wrote: Hi guys,Your card is in read only mode and needs replacement
I am new to the forum so I hope I am not asking question in the wrong place.
I have tried to upgrade my HL HWv1.2 to the FW2.5.0 from 2.4.0., but even if there is no error msg and process seems to be running fine on the end I am still on FW 2.4.0 - any advice ?
I should probably also mentioned that one of the reasons for me to run the upgrade is that I am facing issue with the HL that after a restart all changes or stored e.g. scripts disapears and go back to state of mid Feb.
Not sure if the two problems are linked, but would be greatfull for suggestion how to proceed.
Many thanks
Pedro
edit: I did click the "Sync project data"
RE: New FW for SE is out - iPedro - 06.07.2020
Yep, that was it. I changed the card and FW is upgraded as well as reboot problem solved. Thanks a lot !!
RE: New FW for SE is out - victor.back - 07.07.2020
(05.07.2020, 10:27)Erwin van der Zwart Wrote: Hi,Hi,
HW2 does not require a update, VPN issue only applies to HW1 (older homeLYnk HW).
Next to that it does not apply to any SL HW as Wiser for KNX remote can’t be used on a SL (:
BR,
Erwin
I have updated my Wiser For KNX HW3. And the VPN does not work on this either.
RE: New FW for SE is out - Daniel - 07.07.2020
2.5.1 is coming with a fix.
RE: New FW for SE is out - Erwin van der Zwart - 08.07.2020
Hi,
FW 2.5.1 is just released and should be available on our global website se.com.
BR,
Erwin
RE: New FW for SE is out - victor.back - 10.07.2020
Does it come a 2.5.1 for HW2 & 3 aswell?
RE: New FW for SE is out - Daniel - 10.07.2020
(10.07.2020, 18:35)victor.back Wrote: Does it come a 2.5.1 for HW2 & 3 aswell?Yes
RE: New FW for SE is out - Eklanda - 06.12.2020
Hi,
Where can I find the version 2.5.1 for HW3? When I download the firmware from Schneider it dosn´t include any .lmup file.
BR,
Andreas
RE: New FW for SE is out - admin - 07.12.2020
You need .img file for the firmware upgrade. It is installed through System config > System > Upgrade firmware.