+- LogicMachine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: CANx (https://forum.logicmachine.net/forumdisplay.php?fid=23)
+--- Thread: CANx DALI gateway minimum level (/showthread.php?tid=2819)
CANx DALI gateway minimum level - idhe - 01.09.2020
Hello,
I have install a CANx Dali Gateway and in the dali device parameters I can't change the minimum level lower than 182. It's write that the "Physical minimum = 182" what is this value ?
I would like to change this minimum level to 10. The graduation is not enought between 182 and 254.
There is a screenshot in attachment.
If someone can help me please.
Thanks
RE: CANx DALI gateway minimum level - Daniel - 01.09.2020
This should be the minimum value to which you can dim using this ballast. You can't go lower than that.
RE: CANx DALI gateway minimum level - idhe - 01.09.2020
(01.09.2020, 14:36)Daniel. Wrote: This should be the minimum value to which you can dim using this ballast. You can't go lower than that.
Ok thank you Daniel.
RE: CANx DALI gateway minimum level - PolymorphedCust - 30.10.2025
So the manufacturer of each ballast sets this minimum, which the DALI-GW detects? No way to change it over override it?
We just converted from another DALI-system, where they could go down to 1 %...
RE: CANx DALI gateway minimum level - admin - 30.10.2025
As DALI standard states: PHM = physical minimum level corresponding to the minimum light output the control gear can operate at.
Adjust Minimum arc value accordingly and the input value will be scaled automatically so 1% = set minimum.
RE: CANx DALI gateway minimum level - Daniel - 30.10.2025
Just as a info- this value is in logarithmic format, it is not %, see the chart https://www.dali-alliance.org/dali/keyfeatures.html