+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: General (https://forum.logicmachine.net/forumdisplay.php?fid=2)
+--- Thread: IPv6 support? (/showthread.php?tid=2931)
IPv6 support? - Habib - 23.10.2020
Hi,
we've in germany a new popular internet provider for fibre channel internet (deutsche glasfaser) an he provids only DS-Lite, what means you get an native ipv6 support without usable ipv4 adress for incoming traffic.
What works is to use the ipv6 adress, but for this it's necessary that the LM oder SL gets an ipv6 adress.
Is there an solution for that?
Thx and regards
Habib
RE: IPv6 support? - admin - 23.10.2020
You don't need to have IPv6 on the devices in your network:
Quote:The DS-Lite architecture uses IPv6-only links between the provider and the customer while maintaining the IPv4 (or dual-stack) hosts in the customer network.If you need remote access then VPN/ZeroTier is a better solution.
RE: IPv6 support? - Habib - 23.10.2020
Hi admin,
is zerotier possible with spaceLYnks?
I understand it in that way, that we need a new firmware with zerotier support?
RE: IPv6 support? - Daniel - 23.10.2020
For now not and probably will not be. SE is extremely cautious when it comes to remote access and specially with 3rd party cloud.
RE: IPv6 support? - Habib - 23.10.2020
thx again :-)
And which LM's supports now zerotier?
First I have to learn to identify my LM at home for the correct new firmware ;-)
EDIT: cool... I didn't know about this new feature in update dialog:
RE: IPv6 support? - Daniel - 23.10.2020
For now I have only LM Lite beta fw. Later all of them will get new fw.
RE: IPv6 support? - Habib - 23.10.2020
Is this a matching LM for your Beta Fw?
RE: IPv6 support? - Daniel - 23.10.2020
The FW would run on it but whatever you have as extension will not work. Which LM is it?
RE: IPv6 support? - Habib - 23.10.2020
At moment I don't use any extensions. Only the main device.... I tried successfully the PRE from this one: LM5 Lite + Ext (4 or 6 DIN units)
RE: IPv6 support? - Daniel - 23.10.2020
You didn't get it, LM internally is build from 2 parts, the base which is LM lite and additional card which can be canX, or KNX choke. The full name in on the side label of LM.
RE: IPv6 support? - Habib - 23.10.2020
Ok, I've the LM5p 2-KC
RE: IPv6 support? - Daniel - 23.10.2020
OK so the CANx and the top rs485 port will not work. Do you want to try? You will be able to install the correct fw later.
RE: IPv6 support? - Habib - 23.10.2020
yes :-)
RE: IPv6 support? - Daniel - 23.10.2020
FW https://dl.openrb.com/lm-20-imx6/lm5m3-20201016.img
Instructions: https://openrb.com/zerotier-remote-maintenance-of-lm5/
RE: IPv6 support? - Habib - 23.10.2020
Wow, so easy... it works. thank you. I hope it will be by default in the next releases
RE: IPv6 support? - Trond Hoyem - 01.12.2020
(23.10.2020, 10:52)Daniel. Wrote: FW https://dl.openrb.com/lm-20-imx6/lm5m3-20201016.img
Instructions: https://openrb.com/zerotier-remote-maintenance-of-lm5/
Hi
Just set this up on a LM5 at a customer site. Works very well! Easy to set up and works both for LM5 config and as interface to the KNX-installation.
Any chance that Schneider will add this to the SpaceLYnk as well? Erwin, any thoughts?
RE: IPv6 support? - Daniel - 01.12.2020
Hi, I talked to SE and they are evaluating this solution right now. There was no decision yet. Request this to SE sales for extra push
