+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: Gateway (https://forum.logicmachine.net/forumdisplay.php?fid=10)
+--- Thread: Logic Machine loses all progress after reboot/power failure (/showthread.php?tid=3411)
Logic Machine loses all progress after reboot/power failure - Integrator21 - 09.06.2021
Hello,
I have a LM reactor 3, the problem is that after each power failure it does not save any changes, it stays the same, it worked for 2 years, the last changes I made do not save, I tried restoring from backup, it still display the initial image... it's like the SD card as a write protection and cannot save any more changes, any suggestions please?
RE: Logic Machine loses all progress after reboot/power failure - Daniel - 09.06.2021
Common issue for old hw. Card is in read only mode and has to be replaced.
RE: Logic Machine loses all progress after reboot/power failure - Integrator21 - 09.06.2021
(09.06.2021, 11:46)Daniel. Wrote: Common issue for old hw. Card is in read only mode and has to be replaced.
Is there a tutorial for this operation? thank you , If i upgrade to the latest firmware is the old backup compatible?
RE: Logic Machine loses all progress after reboot/power failure - Daniel - 09.06.2021
Fallow this https://openrb.com/reflash-logicmachine3-and-streaming-player-software/
Yes old backup should work fine on new fw.
RE: Logic Machine loses all progress after reboot/power failure - Integrator21 - 23.06.2021
(09.06.2021, 12:51)Daniel. Wrote: Fallow this https://openrb.com/reflash-logicmachine3-and-streaming-player-software/
Yes old backup should work fine on new fw.
Hello, unfortunately I changed the SD card, updated to the latest firmware the issue is the same, the model is LM Reactor V3 , I used the regular CPU (i.MX28) LM Reactor V3 version, any suggestions? the issue is the same, it does not save changes
RE: Logic Machine loses all progress after reboot/power failure - Daniel - 23.06.2021
Did you replace card with new?
RE: Logic Machine loses all progress after reboot/power failure - Erwin van der Zwart - 23.06.2021
Probably disconnection power before save interval, then nothing is saved, either close down by system - power off or press sync button before cutting the power..
RE: Logic Machine loses all progress after reboot/power failure - Integrator21 - 23.06.2021
(23.06.2021, 08:58)Erwin van der Zwart Wrote: Probably disconnection power before save interval, then nothing is saved, either close down by system - power off or press sync button before cutting the power..
Is there away to check the save interval? or a setting for that?
(23.06.2021, 08:57)Daniel. Wrote: Did you replace card with new?
Yes, 2 sd cards
RE: Logic Machine loses all progress after reboot/power failure - Daniel - 23.06.2021
It is every 30min, or if you pres sync project then it does it instantly.
RE: Logic Machine loses all progress after reboot/power failure - Integrator21 - 23.06.2021
(23.06.2021, 09:23)Daniel. Wrote: It is every 30min, or if you pres sync project then it does it instantly.
Thanks, it works great