+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: General (https://forum.logicmachine.net/forumdisplay.php?fid=2)
+--- Thread: Knx Spacelogic programming with W4KNX / Spacelynk (/showthread.php?tid=3561)
Knx Spacelogic programming with W4KNX / Spacelynk - domotiqa - 16.09.2021
Hello, I have lots of issue on several customer site to program the MTN6705-0008 for example with the Spacelynk or Homelynk KNX Ip interface. It's very often buging to 50% then stop programming due to not respons. No problem with older device
If I retry with my Spacelogic USB interface no problem.
I try 2.6,2.6.1,2.6.2 all same !!
Big problem for our remote customer
RE: Knx Spacelogic programming with W4KNX / Spacelynk - Daniel - 16.09.2021
I sent this to SE support to check. Not much we can do.
RE: Knx Spacelogic programming with W4KNX / Spacelynk - domotiqa - 16.09.2021
(16.09.2021, 10:48)Daniel Wrote: I sent this to SE support to check. Not much we can do.
Thank I post to exchange too, I guess it's due to the long frame support, secure...