+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: Hardware (https://forum.logicmachine.net/forumdisplay.php?fid=12)
+--- Thread: Spacelynk Stop responding (/showthread.php?tid=3718)
Spacelynk Stop responding - khalil - 01.12.2021
Hello
I have a SL installed stop responding
V1.4
LED1 Yellow Blinking
LED2 Yellow Steady
ethernet Green Blinking/ Orange Steady
what could I do
BR,
RE: Spacelynk Stop responding - Daniel - 01.12.2021
For v1.4 it is probably SD card. Replace and see agian.
RE: Spacelynk Stop responding - khalil - 01.12.2021
(01.12.2021, 11:21)Daniel Wrote: For v1.4 it is probably SD card. Replace and see agian.
Thanks Daniel
I cant even access the SL, does the SD card make such thing when it failed?
Edit: Regarding the current backup it stored in the SD Card so it will be erased?
RE: Spacelynk Stop responding - Daniel - 01.12.2021
You should use new card, not the same one. You can try of making existing card image and restore it on new.
RE: Spacelynk Stop responding - khalil - 02.12.2021
(01.12.2021, 11:42)Daniel Wrote: You should use new card, not the same one. You can try of making existing card image and restore it on new.
Hello
I used a new card, but when I restore the existing card image it didnt open, while when I restore the factory image its work.
how could I check the existing image?
edit: I sent you PM with the Image if you could check.
BR,
RE: Spacelynk Stop responding - Daniel - 02.12.2021
In this case it means some files were already corrupted and it is hard to extract stuff from it. I would recommend restore any backup you have and start from there
RE: Spacelynk Stop responding - khalil - 02.12.2021
(02.12.2021, 08:29)Daniel Wrote: In this case it means some files were already corrupted and it is hard to extract stuff from it. I would recommend restore any backup you have and start from there
Thanks Daniel,
When I restore the existing image it will be restored with the old network settings, so I should access via the old IP?
BR,
RE: Spacelynk Stop responding - Daniel - 02.12.2021
If you restore full card image then it is full copy of the device also systems. When you restore backup then the system is unchanged.
RE: Spacelynk Stop responding - YOUSSEF - 24.04.2023
Hello i have the same problem with a spacelynk v1.2
i already changed the card and i did a factory reset
i did also the FW update 2.8.0
at first it opens, but if the power cuts SL stop working, no ping ( led statuts are normal )
RE: Spacelynk Stop responding - Daniel - 25.04.2023
Did you flash the card with recovery image or did you copy old SD to new?
RE: Spacelynk Stop responding - YOUSSEF - 05.05.2023
(25.04.2023, 08:07)Daniel Wrote: Did you flash the card with recovery image or did you copy old SD to new?
i did a flash with recovery image, but now am having the issue that no led is working, could it be related to SD card or a power issuue?
RE: Spacelynk Stop responding - Erwin van der Zwart - 05.05.2023
Do you have HW3.2? If yes, did you use recovery-imx6-1g.img for the recovery?
If you have older HW, did you extract the image so it is around the 950Mb before restore it to the SD card with USB image tool?
RE: Spacelynk Stop responding - YOUSSEF - 08.05.2023
(05.05.2023, 11:34)Erwin van der Zwart Wrote: Do you have HW3.2? If yes, did you use recovery-imx6-1g.img for the recovery?
If you have older HW, did you extract the image so it is around the 950Mb before restore it to the SD card with USB image tool?
i have a older HW, the img is 250Mb. can you provide me a valid img that i can test with
Thank you Erwin
RE: Spacelynk Stop responding - Erwin van der Zwart - 08.05.2023
You can download the needed files for HW1 to HW3.1 here: https://www.se.com/ww/en/download/document/AN2_001_SL/
For HW1 extract the file sL_HW1_xx\sL_HW1_xx_recovery.img.gz resulting in file recovery-mxs-1g.img of 947.2 Mb and restore this file with USB Image tool to your SD card.
For HW2/3 extract the file sL_HW2_xx_HW3_xx\sL_HW2_xx_3_xx_recovery.img.gz resulting in file rec2.img of 947.2 Mb and restore this file with USB Image tool to your SD card.
RE: Spacelynk Stop responding - YOUSSEF - 08.05.2023
(08.05.2023, 11:26)Erwin van der Zwart Wrote: You can download the needed files for HW1 to HW3.1 here: https://www.se.com/ww/en/download/document/AN2_001_SL/
For HW1 extract the file sL_HW1_xx\sL_HW1_xx_recovery.img.gz resulting in file recovery-mxs-1g.img of 947.2 Mb and restore this file with USB Image tool to your SD card.
For HW2/3 extract the file sL_HW2_xx_HW3_xx\sL_HW2_xx_3_xx_recovery.img.gz resulting in file rec2.img of 947.2 Mb and restore this file with USB Image tool to your SD card.
thank you, i did the restore correctly, still my SL has no leds working (as there is no power) i guess its gone :/
RE: Spacelynk Stop responding - Erwin van der Zwart - 09.05.2023
That could be the case, however defect HW is very rare, have seen 1 device that was realy broken (aka not SD card related) up to now in all those years...