+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: Gateway (https://forum.logicmachine.net/forumdisplay.php?fid=10)
+--- Thread: EEBUS Wallbox (/showthread.php?tid=3729)
EEBUS Wallbox - pioneersteffen - 05.12.2021
Hi @all,
are there any plans to integrate EEBUS function for charging/wallbox use case?
Many thanks in advance.
Best Regards
Steffen
RE: EEBUS Wallbox - Daniel - 06.12.2021
EEBus is DE only. SE version will have this integrated. We see no market for this yet.
RE: EEBUS Wallbox - pioneersteffen - 31.05.2022
Hi @all,
has anybody information if and when SE will release EEBUS for W4K? If SE is looking for a beta tester I would be happy to help - I having two EEBUS wallboxes with Kostall solar inverter and a battery.
Is there any scripting solution to control a wallbox via EEBUS as an alternative? I just want to read the plug and charging status and set the max. allowed current.
Many thanks for your help!
Best Regards
Steffen
RE: EEBUS Wallbox - pioneersteffen - 05.11.2022
Hi @all,
After I’ve got feedback from SE support that there is no focus on EEBUS at the moment due to the new app I’m really worried that I never getting a solution to connect the wallbox to the controller although SE is saying since 2020 via video and the homepage W4K would support this already.
But I know it is not your fault from LM side.
That’s why one question. I‘ve found an working EEBUS solution running on the raspberry:
https://github.com/evcc-io/eebus
Do you see a chance to adapt the code from GO to LUA?
Many thanks for your help.
Best Regards
Steffen
RE: EEBUS Wallbox - admin - 07.11.2022
Rewriting such code is very time-consuming. Go has an ability to be compiled into a static binary that can be run on the controller without installing any additional packages. You can get an RPi or use a virtual machine to play with this solution but it's not something that we can help with.
RE: EEBUS Wallbox - pioneersteffen - 11.11.2022
Hi admin,
many thanks for your help! The idea to compile it to an static binary and let it run on LogicMachine sounds promising. Do you have a hint how to let a static binary start/run on LogicMachine?
Many thanks!
Best Regards
Steffen