+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: Gateway (https://forum.logicmachine.net/forumdisplay.php?fid=10)
+--- Thread: DSC Alarm (/showthread.php?tid=395)
DSC Alarm - josep - 21.09.2016
Hello,
I need to know if exist the option to integrate DSC Alarm system into Logicmachine control using RS232 or IP protocols, I used Crestron integration in the past and it worked fine but I prefer integrate directly to KNX using Logic Machine if it is possible, THX
RE: DSC Alarm - stoikij - 26.12.2016
I know only Paradox alarms systems integration on KNX with Poland firm TOKKA gateway
http://www.tokka.pl/offer.html
RE: DSC Alarm - hima - 13.06.2017
Hi,
Please let us know if DSC alarm panel integration with LM5 available. Has anyone done the integration already?
RE: DSC Alarm - AlexLV - 13.06.2017
DSC has a closed protocol, but I think it is based on RS485. May be somebody can play with it - try to connect directly to it's BUS. Also I know that only Poland panel Satel has module for KNX integration...
I spoke with LM developers, they have something like "LM security" device.. But approx. price was very big for me. What do you think - can be interesting for community security panel integrated with LM? What interfaces do you need? I with pleasure can test such a prototype and give my recommendations/advises.. (My main job - service engineer, configuring different security/access systems.. What I see - it can be device with 4-8 inputs, max 4 areas, some DO, DI, LAN and interfaces.. Zone types can be made as a scripts... Any ideas??
RE: DSC Alarm - bmodeco - 15.06.2017
Just FYI: Inim (italian) has KNX module also for their smartliving - I am currently working with it to get it installed.
It supports partition on/off, zone info(motion), ... The module is very pricey... but once you have it running it allows for triggering based on home, not at home, asleep - if you like us always put on the alarm.
http://www.inim.biz/prodotto.php?node=341&lang=en
[/url]
[url=http://www.inim.biz/prodotto.php?node=341&lang=en]
RE: DSC Alarm - tecnorte - 21.12.2019
INIM also has ModBUS possibility.