+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: General (https://forum.logicmachine.net/forumdisplay.php?fid=2)
+--- Thread: problem when importing WISER with Fujitsu UTY-VKGX devices (/showthread.php?tid=3977)
problem when importing WISER with Fujitsu UTY-VKGX devices - stawros - 06.04.2022
There is a problem when importing the project to WISER
After adding the Fujitsu UTY-VKGX devices to the project in ETS, importing the project fails - error page. It seems that it is related to the file size of this device. Is there a vitamin known for this?, how to solve this problem ?
https://www.fujitsu-general.com/g-eu/products/vrf/adaptor/uty-vkgx.html
RE: problem when importing WISER with Fujitsu UTY-VKGX devices - Daniel - 07.04.2022
Which HW version do you use? You can always do esf import.
RE: problem when importing WISER with Fujitsu UTY-VKGX devices - stawros - 07.04.2022
HW: Wiser for KNX (i.MX6)
SW: 2.6.2
When I finished designing in ETS, I found out that I cannot import the project, I lost a lot of time to find the reason. I wonder why this particular device is causing the problem.
I solved it like this: I create a temporary new project and only copy group addresses to it, and such a lean project (without devices) can be imported. It's a bit of a hassle.
RE: problem when importing WISER with Fujitsu UTY-VKGX devices - Daniel - 07.04.2022
HW version is on the side label. Just check how much Total System memory you have. It is System Status.
RE: problem when importing WISER with Fujitsu UTY-VKGX devices - stawros - 07.04.2022
V3.1
Total system memory 249.0M
Used 16.9M (7%)
Free 232.1M (93%)
Buffered 7.3M
Cached 11.0M
RE: problem when importing WISER with Fujitsu UTY-VKGX devices - Daniel - 07.04.2022
OK, this is a surprise, how big is he project?
RE: problem when importing WISER with Fujitsu UTY-VKGX devices - stawros - 07.04.2022
When I was looking for the reason, I noticed that it is enough to add only this device to the naked project and the project cannot be imported anymore.
RE: problem when importing WISER with Fujitsu UTY-VKGX devices - Daniel - 07.04.2022
If you can send to pm your project and we will look in to it.
RE: problem when importing WISER with Fujitsu UTY-VKGX devices - admin - 08.04.2022
This is due to a large device description file in the project which causes browser tab crash. This only affects Chrome/Edge but not Firefox. A work-around fix will be implemented in the next firmware.
RE: problem when importing WISER with Fujitsu UTY-VKGX devices - stawros - 10.04.2022
(07.04.2022, 07:32)Daniel Wrote: Which HW version do you use? You can always do esf import.
(08.04.2022, 09:28)admin Wrote: This is due to a large device description file in the project which causes browser tab crash. This only affects Chrome/Edge but not Firefox. A work-around fix will be implemented in the next firmware.
Hey, great it works on firefox, until i fix it i'll be running on firefox. Thanks, have a nice day.