+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: General (https://forum.logicmachine.net/forumdisplay.php?fid=2)
+--- Thread: Factory Reset "how to"? (/showthread.php?tid=4549)
Factory Reset "how to"? - Jonas S - 02.02.2023
Hello
I must have messed up when I set the ip on a spacelynk
Can find it anymore
Anyhow tried the different factory reset but i just can't get it to work, must be doing something wrong
tried:
- push button for 10s
- pushbutton for 10s, relase, push button for 10s
am I missing something?
RE: Factory Reset "how to"? - admin - 02.02.2023
Did the LED2 (red) blink as stated in the manual when performing the reset procedure? Check that the device reboots after the reset.
RE: Factory Reset "how to"? - Daniel - 02.02.2023
The key is to monitor the LED. Press reset button and LED will go red, after 10s LED will start flashing. Release and press again LED will go RED and after 10 seconds it will start flashing faster. Now it is done.
RE: Factory Reset "how to"? - Jonas S - 02.02.2023
(02.02.2023, 08:38)Daniel Wrote: The key is to monitor the LED. Press reset button and LED will go red, after 10s LED will start flashing. Release and press again LED will go RED and after 10 seconds it will start flashing faster. Now it is done.
This worked thank you
, sadly nowhere in the manual does it mention the led what I can findonly now it doesn't accept my backup, invalid file? the backup is just before I changed the ip
RE: Factory Reset "how to"? - Daniel - 02.02.2023
Which fw do you have?
RE: Factory Reset "how to"? - Jonas S - 02.02.2023
(02.02.2023, 12:10)Daniel Wrote: Which fw do you have?
never mind, got it to work now, renamed it to .tar
2.8.0