+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: General (https://forum.logicmachine.net/forumdisplay.php?fid=2)
+--- Thread: KNX Filtering (/showthread.php?tid=4716)
KNX Filtering - The Real Mr.T - 14.04.2023
Greetings
I have a question about the filter rules in Spacelynk.
Is it not possible to Filter IP>Local and still got the objects in Visu?
My Topology Structure is similiar like this:
I have a Weather Station behind Logic Machine for central Tasks.
But of course all the IP Traffic is to much for TP.
If i activate Filter IP>Local then there is also no traffic from IP "inside" the machine.
I hope it is understandable what I mean
RE: KNX Filtering - Daniel - 17.04.2023
Local are the telegrams which LM can see, If you block it then no LM will not see them.
You can filter individual telegrams or even simpler a physical address of your weather station.
RE: KNX Filtering - The Real Mr.T - 18.04.2023
Ok Thank You.
So LM is not working like a KNX IP Router because there is no Filtering between IP and TP.
RE: KNX Filtering - Daniel - 19.04.2023
It does, page 96
https://openrb.com/wp-content/uploads/2022/05/LM-manual_3.2022.pdf