(08.06.2023, 09:09)admin Wrote: LM firmware 2023.06 is ready.

This firmware fixes possible project loss when several power cycles happen in a short time period.

---

Users running 2023.04 can install an update package instead of a full firmware upgrade

Go to LogicMachine > Utilities > Install updates
update file | signature

---

You can find the hardware model in the "Upgrade firmware" window:



LM5 Power devices with i.MX6 CPU
LM5 Lite (3 DIN units): image file | signature
LM5 Lite + Ext (4 or 6 DIN units): image file | signature
LM5 Reactor GM KNX: image file | signature
LM5 Reactor GM CANx: image file | signature
LM5 Reactor Dimmer KNX: image file | signature
LM5 Reactor Dimmer CANx: image file | signature
LM5 Reactor IO V2: image file | signature
LM5 M4 (4 DIN units): image file | signature
LM Wall (Ambient V2): image file | signature

Extra packages (i.MX6 CPU)

---

Devices with old CPU (i.MX28)
LM2 IMX: image file | signature
LM3 V1 (4 x RS-485): image file | signature
LM3 V2 (3 x RS-485 and 1 x RS-232): image file | signature
LM4: image file | signature
LM5 Lite (3 DIN units): image file | signature
LM5 Lite + Ext (4 or 6 DIN units): image file | signature
LM5 4 DIN units: image file | signature
LM Wall (Ambient): image file | signature
LM Reactor Lite: image file | signature
LM Reactor V1: image file | signature
LM Reactor V2: image file | signature
LM Reactor V3: image file | signature

Extra packages (i.MX28 CPU)

Video tutorials: https://forum.logicmachine.net/showthread.php?tid=3263&pid=21069#pid21069

(11.08.2023, 15:19)myg Wrote: should i see firmware version updated to 2023.06 after installing just update package? or do I need to reboot?

(27.10.2023, 09:43)Daniel Wrote: The issue in April firmware was definitely fixed so your issue must be related to something else.  Why do you say you lost project? Maybe data got corrupted? If the power outage happens in a moment when LM tries to save project to SD then unexpected things can happen.

(27.10.2023, 10:22)Daniel Wrote: Can you make a backup of this LM (with lost project) and send to PM?

(27.10.2023, 10:32)Daniel Wrote: You've destroyed the evidence
If it happens again we need to investigate it.

(27.10.2023, 10:19)jmir Wrote: I say project lost because there was a project (plans, scripts, groupaddresses,...) in the logic machine and after two or three power losses on a short period all data has gone....
(Icons, net configuration, ftp files, ... are not lost)

I had experienced the same issue using april firmware...

(14.11.2023, 12:42)admin Wrote: You have LM with on-board flash that is used to store the database and trends. Looks like it was not detected during one boot and the project was "lost". If such issue happens again contact us for a repair/replacement. Make sure to backup LM project periodically.

(19.11.2023, 16:02)zoltan Wrote:

(14.11.2023, 12:42)admin Wrote: You have LM with on-board flash that is used to store the database and trends. Looks like it was not detected during one boot and the project was "lost". If such issue happens again contact us for a repair/replacement. Make sure to backup LM project periodically.

Is there option to check the health of that flash? I don't see any reference in the system log, only this "mmcblk0: p1 p2 p3", but it's the SD-Card.

The LM is this:
HW: LM5 Reactor IO V2/V3 (i.MX6)
SW: 20230607