+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: General (https://forum.logicmachine.net/forumdisplay.php?fid=2)
+--- Thread: Can't save anything (/showthread.php?tid=5118)
Can't save anything - piotreviron - 28.11.2023
Hello ,
I have a problem with saving changes on mosaic 3.0 . I m on my admin account but I can t save anything . Every widgets works and functions too . What can I do to solve this problem? I tried to restart the device but this doesn't change anything. :/
RE: Can't save anything - Daniel - 28.11.2023
Go to LM and create a new object, then pres Sync project data and reboot LM. If this object is no longer there then your SD card has switched to read only mode and it will need a replacement. You can make a copy of this card and restore it on new or backup and fallow this.
https://kb.logicmachine.net/misc/reflash-lm-and-streaming-player/
RE: Can't save anything - piotreviron - 28.11.2023
(28.11.2023, 11:22)Daniel Wrote: Go to LM and create a new object, then pres Sync project data and reboot LM. If this object is no longer there then your SD card has switched to read only mode and it will need a replacement. You can make a copy of this card and restore it on new or backup and fallow this.
https://kb.logicmachine.net/misc/reflash-lm-and-streaming-player/
I did it and the new object has been saved and after reboot it's still there . What now ?
RE: Can't save anything - Daniel - 28.11.2023
Send me your backup via PM. Use wetransfer.com or similar
RE: Can't save anything - jeeone - 21.12.2023
(28.11.2023, 11:12)piotreviron Wrote: Hello ,
I have a problem with saving changes on mosaic 3.0 . I m on my admin account but I can t save anything . Every widgets works and functions too . What can I do to solve this problem? I tried to restart the device but this doesn't change anything. :/
I have exacly the same problem, in Chrome developer console I got this error:
Error in /usr/share/lua/redis.lua at line 0: redis error: OOM command not allowed when used memory > 'maxmemory'.
RE: Can't save anything - Daniel - 21.12.2023
The issue above was generated by use of custom images. Use very small images and try to avoid using them as much as possible.
RE: Can't save anything - jeeone - 21.12.2023
(21.12.2023, 13:41)Daniel Wrote: The issue above was generated by use of custom images. Use very small images and try to avoid using them as much as possible.
Yes, I recently upload the background images into mosaic. After uploading I got this error.
Thank you Daniel!