+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: Gateway (https://forum.logicmachine.net/forumdisplay.php?fid=10)
+--- Thread: bacnet alarm (/showthread.php?tid=5259)
bacnet alarm - Deison Taborda - 21.02.2024
Good morning
I have a question: I am monitoring a device through the LogicMachine device using the bacnet-client APP but I have not been able to generate an alarm that indicates the absence of the baCnet (disconnection of the ethernet cable).
RE: bacnet alarm - Daniel - 21.02.2024
This app doesn't have any alarm features but if you would use our script solution then you can also see the error.
https://kb.logicmachine.net/libraries/bacnet-client/
RE: bacnet alarm - Deison Taborda - 21.02.2024
PERFECT!! THANK YOU VERY MUCH.
APP bacnet alarm - Deison Taborda - 21.02.2024
Hello,
Could someone share the BaCnet client file to install on a LogicMachine that does not have internet.
RE: bacnet alarm - Daniel - 21.02.2024
Which firmware and CPU do you have?
RE: bacnet alarm - Deison Taborda - 21.02.2024
(21.02.2024, 17:42)Daniel Wrote: ¿Qué firmware y CPU tienes?firmware V 2.8.3
CPU: ARMv7 processor 5 (v7l)
RE: bacnet alarm - Daniel - 21.02.2024
You cannot install our packages on SE hardware, this is not an app.
RE: bacnet alarm - djaval - 22.02.2024
(21.02.2024, 18:13)Deison Taborda Wrote:(21.02.2024, 17:42)Daniel Wrote: ¿Qué firmware y CPU tienes?firmware V 2.8.3
CPU: ARMv7 processor 5 (v7l)
Try this one
bacnet-client.ipk (Size: 2.24 MB / Downloads: 4)