+- LogicMachine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: Visu beta testing (https://forum.logicmachine.net/forumdisplay.php?fid=24)
+--- Thread: forsterm (/showthread.php?tid=5685)
forsterm - forsterm - 18.10.2024
Bugs
- The first bug I found is that I can't seem to enlarge the elements with the mouse, at least I thought that should be possible. (see the attached webm video).
Improvements - forsterm - 19.10.2024
Improvements
- Possibility to set location of element directly if I select an element.
- Possibility to select more elements with mouse.
- Save button: At the moment it seems that all plans are saved automatically.
I would like to have a save button where I have to save the plan manually.
RE: forsterm - admin - 21.10.2024
Thanks for testing.
Bugs:
1. Provide steps to reproduce and/or backup from your controller.
Improvements:
1. We might add this later.
2. Using Ctrl/Shift + click should be enough for most cases.
3. This stays as is it, automatic saving is a deliberate design choice.
RE: forsterm - forsterm - 23.10.2024
2. Ok, I find that selecting multiple objects with the mouse is firstly faster than having to click on each one individually and secondly it is an intuitive function, so I believe that many users assume that they can select multiple objects with the mouse.
Is it too complex to programme this functionality, or just a "design" decision?
3. Would it then be possible to insert an "undo" button?
RE: forsterm - forsterm - 29.10.2024
Bugs:
1. If I try to resize I get this error:
Improvements:
2. I disagree, because I am much faster when I can select several objects with the mouse instead of clicking one after the other.
I am also sure that all my customers will intuitively try to select several elements with the mouse, as this is possible in any software today.
So please add this function.
3. Ok, but then I would like to have an "undo" button.
(21.10.2024, 11:53)admin Wrote: Thanks for testing.
Bugs:
1. Provide steps to reproduce and/or backup from your controller.
Improvements:
1. We might add this later.
2. Using Ctrl/Shift + click should be enough for most cases.
3. This stays as is it, automatic saving is a deliberate design choice.
RE: forsterm - admin - 29.10.2024
Resizing issue is caused by a missing function in the firmware that you use.
RE: forsterm - forsterm - 04.11.2024
Ok, that's quite possible, I tested it on a W4K with FW 3.0.0.
(29.10.2024, 10:52)admin Wrote: Resizing issue is caused by a missing function in the firmware that you use.