+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: Visualization (https://forum.logicmachine.net/forumdisplay.php?fid=9)
+--- Thread: Unable to assign all group addresses in HVAC (/showthread.php?tid=5895)
Unable to assign all group addresses in HVAC - BarryFromBondi - 20.02.2025
I have a requirement to assign KNX group addresses to individual parameters on the Airconditioning widget
I can scroll and see on some of the fields the required group addresses, on other parameters (eg operation mode) I can not see any of the required group addresses
Why is this and how do I resolve?
Thanks
RE: Unable to assign all group addresses in HVAC - Daniel - 20.02.2025
Widgets filter groups which have correct datatype for a particular object, it means you must convert it.
RE: Unable to assign all group addresses in HVAC - BarryFromBondi - 20.02.2025
Thanks Daniel
2 questions.
Does Logic Machine automatically update datatypes from KNX if they are changed in ETS, or do i have to manually reimport
Is there a data dictionary of what datatype is valid for each field in a widget?
Thanks
RE: Unable to assign all group addresses in HVAC - Daniel - 20.02.2025
1 no you should remove such group and import ets project or just change manually in object in LM.
2. Not really but you can ask which one you are not sure.
RE: Unable to assign all group addresses in HVAC - BarryFromBondi - 21.02.2025
I've just reallocated the dpt types for HVAC Control mode 20.105 however it still doesnt show up as an object i can reference in Mosaic for the "climate mode status object"
RE: Unable to assign all group addresses in HVAC - Daniel - 21.02.2025
See this
https://forum.logicmachine.net/showthread.php?tid=1978&pid=12323#pid12323