![]() |
Internal DALI gateway not working - Printable Version +- Logic Machine Forum (https://forum.logicmachine.net) +-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1) +--- Forum: CANx (https://forum.logicmachine.net/forumdisplay.php?fid=23) +--- Thread: Internal DALI gateway not working (/showthread.php?tid=6097) |
Internal DALI gateway not working - Chandrias - 01.09.2025 After the last update to v20250813, I noticed that the Internal DALI gateway is not working. Any suggestions on how to troubleshoot that? RE: Internal DALI gateway not working - Daniel - 01.09.2025 Which LM do you have? RE: Internal DALI gateway not working - Chandrias - 02.09.2025 (01.09.2025, 18:20)Daniel Wrote: Which LM do you have? LM5p2-KCD RE: Internal DALI gateway not working - Daniel - 02.09.2025 We tested it on this LM and it works fine, maybe you installed wrong firmware? RE: Internal DALI gateway not working - Chandrias - 03.09.2025 (02.09.2025, 13:33)Daniel Wrote: We tested it on this LM and it works fine, maybe you installed wrong firmware? If I am not mistaken, I installed the correct one. RE: Internal DALI gateway not working - Daniel - 03.09.2025 This is wrong, you need LM5 Lite + Ext (4 or 6 DIN units) RE: Internal DALI gateway not working - Chandrias - 04.09.2025 I messed it with my old LM. Is it ok to install the correct version now? RE: Internal DALI gateway not working - Daniel - 04.09.2025 yes RE: Internal DALI gateway not working - Chandrias - 04.09.2025 (04.09.2025, 14:08)Daniel Wrote: yes Daniel, I just installed the correct version and everything is back in order. I am not sure how I ended in this mistake, but I suspect something, that I suggest you to investigate. Usually, when I have to update, I check the previous version and then I download and install the appropriate files. Prior to the most recent update, I changed my LM, so I created a backup of all the configurations and then restored it to the new LM. The only bug that could cause this mess, is if the backup/restore process caused the LM to show the wrong version. For me it is solved, so thank you for the help. RE: Internal DALI gateway not working - Daniel - 05.09.2025 Backup does not contain this information. It cannot change the firmware version information. RE: Internal DALI gateway not working - Chandrias - 05.09.2025 (05.09.2025, 06:51)Daniel Wrote: Backup does not contain this information. It cannot change the firmware version information. Then, it entirely my fault. Thanks for your help. |