+- LogicMachine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: Hardware (https://forum.logicmachine.net/forumdisplay.php?fid=12)
+--- Thread: Group objects are not visible (/showthread.php?tid=6144)
Group objects are not visible - Ozturker - 08.10.2025
Hello,
Suddenly I lost the view for the group objects. Everything works fine but no group objects displayed. Object logs continue to come.
Is it because I reach to some limit? Or something is not working?
Thank you
Ozturker
RE: Group objects are not visible - Daniel - 08.10.2025
Did you have a power outage recently?
RE: Group objects are not visible - Ozturker - 08.10.2025
(08.10.2025, 10:48)Daniel Wrote: Did you have a power outage recently?
No actually. But I cut the power to see if it helps. LM runs on battery back up
RE: Group objects are not visible - Erwin van der Zwart - 08.10.2025
Are you behind a VPN device? I have seen this last week on a project where they used Ixon as VPN platform and noticed same behaviour, objects overview was empty but logic and telegrams kept working, when connecting directly to the device it worked as normal and objects where displayed..
RE: Group objects are not visible - Ozturker - 08.10.2025
(08.10.2025, 11:11)Erwin van der Zwart Wrote: Are you behind a VPN device? I have seen this last week on a project where they used Ixon as VPN platform and noticed same behaviour, objects overview was empty but logic and telegrams kept working, when connecting directly to the device it worked as normal and objects where displayed..
Hi Erwin, based on your suggestion I have tested that there is no VPN. I also reduced the number of scripts and CPU load.
Can it be something about the virtual objects? Recently I have added 15-20 virtual objects for an integration with Smartthings.
RE: Group objects are not visible - FatMax - 08.10.2025
Have you tried other browsers?
RE: Group objects are not visible - Ozturker - 08.10.2025
yes same result with Edge
RE: Group objects are not visible - Daniel - 08.10.2025
Send me your backup to PM, I will check on another device.
RE: Group objects are not visible - Ozturker - 09.10.2025
Hi Daniel,
Have you got the chance to download the backup?
Thank you
RE: Group objects are not visible - Daniel - 09.10.2025
I sent you PM message yesterday. It all works for me on my test SL. If clearing cache didn't help then it must be some corruption. I would re-flash SD card.
RE: Group objects are not visible - FatMax - 09.10.2025
My best guess is a browser issue. I experience this from time to time and just switch browsers to mitigate. I use Safari and Chrome.
There is also an issue if you click yes to the "yellow" https message that pop up sometimes when you log in. You then need to go into Configurator -> Utilities -> System and make sure that both http and https is enabled in the menu Services -> Http server.
Hope this solves it for you and that it's not a wider hardware issue.
RE: Group objects are not visible - Ozturker - 10.10.2025
Thank you so much all. Finally I have replaced the current flash card with a new one. And now group addresses came back. So can we conclude saying the flash was corrupted due to power challenges?
Small curiosity. The installed card was 1GB and I have attached a 16GB. Will the LM be able to use the remaining space or it is not addressed at all?
RE: Group objects are not visible - Daniel - 10.10.2025
LM yes bus Wiser no
