+- LogicMachine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: Gateway (https://forum.logicmachine.net/forumdisplay.php?fid=10)
+--- Thread: bacnet parameters (/showthread.php?tid=6267)
bacnet parameters - ALEJANDRO - 23.01.2026
Good morning,
My client is requesting a BACnet IP mapping with a series of characteristics that I don't see in the Logic Machine configurations. They need a column with units and data type.
I'm not sure if this configuration exists to be included in the CSV file. I've looked here: https://kb.logicmachine.net/integration/bacnet-server/, and I don't find anything.
I've attached screenshots of what they're requesting. Thank you very much.
RE: bacnet parameters - admin - 23.01.2026
You can download the BACnet object list in System config > Network > BACnet objects > Download CSV. At the moment units are not exported. All LM BACnet objects are R/W.
RE: bacnet parameters - ALEJANDRO - 23.01.2026
Ok, thank you so much.
RE: bacnet parameters - ALEJANDRO - 03.02.2026
Good morning,
Would it be possible to download the objects that we are not going to export to BACNET into a CSV file?
Thanks
Alejandro
RE: bacnet parameters - Daniel - 03.02.2026
Check this, old solution but should stll works.
https://forum.logicmachine.net/showthread.php?tid=1126&pid=6712#pid6712
RE: bacnet parameters - Erwin van der Zwart - 03.02.2026
is this a nice way to say I’m getting old??
RE: bacnet parameters - Daniel - 03.02.2026
(03.02.2026, 11:54)Erwin van der Zwart Wrote: is this a nice way to say I’m getting old??