Logic Machine Forum
DALI motion sensors and DT8 - Printable Version

+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: Gateway (https://forum.logicmachine.net/forumdisplay.php?fid=10)
+--- Thread: DALI motion sensors and DT8 (/showthread.php?tid=761)

DALI motion sensors and DT8 - leonidas - 28.04.2017

Hello,

1. Does LM support DT8 (Colour control) DALI devices? For example this dimmer
2. Does LM support DALI motion detectors? For example this one

RE: DALI motion sensors and DT8 - admin - 28.04.2017

Only standard DALI commands are supported, multi-master mode (needed for any kind of sensors) is not supported.

RE: DALI motion sensors and DT8 - leonidas - 02.05.2017

http://www.dali-ag.org/discover-dali/dali-standard.html

DT8 should be standard DALI command, isn't it?

RE: DALI motion sensors and DT8 - Albertor - 02.05.2017

Hello,
If it could be helpful, the DALI-KNX gateway from Schneider Electric supports DT8 ballasts, from this point on, I have not yet integrated this type of ballast, so I do not tell you the compatibility with the object data and the LM or HL ...

Let's see if anyone in the forum has been able to work with dt8 and HL or LM.

Greetings colleagues  Wink

RE: DALI motion sensors and DT8 - Erwin van der Zwart - 02.05.2017

Hi,

Correct, we support DT8 on MTN6725-0001 (from gateway FW 1.3)

From HL you can control the templates to set RGB or K values.

BR,

Erwin

RE: DALI motion sensors and DT8 - german.cespedes@ecoelec.cl - 12.09.2017

(02.05.2017, 15:15)Erwin van der Zwart Wrote: Hi,

Correct, we support DT8 on MTN6725-0001 (from gateway FW 1.3)

From HL you can control the templates to set RGB or K values.

BR,

Erwin
how is HL done to perform this type of RGB control?

in ETS5 only appears to me to realize regulation, connection, value and states

Regards

RE: DALI motion sensors and DT8 - Erwin van der Zwart - 13.09.2017

Hi,

See page 32 to 34 of this document: http://download.schneider-electric.com/files?p_enDocType=System+user+guide&p_File_Id=1716157759&p_File_Name=MTN6725-0001_SW_2016_4_EN.pdf&p_Reference=MTN6725-0001_SW_2016_4_EN

BR,

Erwin

RE: DALI motion sensors and DT8 - jakub.zlatnansky - 18.01.2018

(28.04.2017, 06:42)admin Wrote: Only standard DALI commands are supported, multi-master mode (needed for any kind of sensors) is not supported.

Hello,
 
does this mean, that LM integrated DALI gateway will not support DT8 devices? Or is an integration of DT8 into LogicMachine native gateway planned for foreseeable future? 
I would gladly test it, because I have an installation where a single DT8 device has been added by a client and now I am unable to integrate it Sad
 
Thank you,
Jakub