Posts: 59
Threads: 3
Joined: Nov 2016
Reputation:
0
hello, help me solve this problem.
My logic machine 4 after 5-6 days stops responding to all requests. Ping is not determined, although special programs see un IP address and MAC address. It helps only soft hardware reset. Then again, 5-6 days everything works without problems What could it be?
Posts: 4643
Threads: 24
Joined: Aug 2017
Reputation:
207
most likely card is in read only mode.
------------------------------
Ctrl+F5
Posts: 59
Threads: 3
Joined: Nov 2016
Reputation:
0
but I don't have a card ...
Posts: 4643
Threads: 24
Joined: Aug 2017
Reputation:
207
Every LM has a card just first check if it is in read only mode. Change some settings in LM, sync project and reboot. If after reboot your changes are lost then it is.
------------------------------
Ctrl+F5
Posts: 59
Threads: 3
Joined: Nov 2016
Reputation:
0
Thanks for the quick response! How can I put the card in recording mode?
Posts: 4643
Threads: 24
Joined: Aug 2017
Reputation:
207
You cant, it has to be replaced and re flashed.
See here
http://openrb.com/reflash-logicmachine3-...-software/
------------------------------
Ctrl+F5
Posts: 59
Threads: 3
Joined: Nov 2016
Reputation:
0
Thanks for the help! I will try
Posts: 59
Threads: 3
Joined: Nov 2016
Reputation:
0
Daniel, hello.
After the project changes and restarts, the changes remain in effect. So the problem is not in the memory card. Any more ideas to solve this problem?)
Posts: 4643
Threads: 24
Joined: Aug 2017
Reputation:
207
(15.06.2019, 12:20)Igor68 Wrote: Daniel, hello.
After the project changes and restarts, the changes remain in effect. So the problem is not in the memory card. Any more ideas to solve this problem?)
Hm, then probably some memory issue. How much memory do you use? Do you have lot of trends?
------------------------------
Ctrl+F5
