1-wire on LM5lite with DS9490R dongle

[robikozo]

Hello,

I would like to integrate 1-wire temperature, lux and humidity sensors into the LM5lite, can You explain how i can do it further? Maybe there is a way of reading values with a script or so?
I really need a quick answer.

Best Regards, 
Robertas Birgiolas’s

[admin]

Check that you have 2023 firmware then install libow, owserver, luaow and genohm-scada-w1 packages from here: https://dl.openrb.com/lm-23-imx6/pkg/
Install through System config > System > Packages > Add package (green plus icon).

[a455115]

Check that you have 2023 firmware then install libow, owserver, luaow and genohm-scada-w1 packages from here: https://dl.openrb.com/lm-23-imx6/pkg/
Install through System config > System > Packages > Add package (green plus icon).

Can other adapters be used for 1-wire?

[admin]

Only DS9490R is supported over USB.

[robikozo]

I ordered DS9490R, waiting for arival, after recieving it I will test it and tell You the results.

Thanks