DALI2 KCD

[joaodaniel.pereira]

Hi, 
I have a KCD device, I'm trying to read a DALI2 equipment.

It's possible ?

I set the 0.1 DALY GATEWAY (INTERNAL) ... But the scan DALI2 return 0 elements !

[admin]

What kind of device are you connecting? What DALI power supply is used?

[joaodaniel.pereira]

What kind of device are you connecting? What DALI power supply is used?

Hi,
I'm trying to read:

https://www.tridonic.com/en/int/product/22213?tab=0
and
Steinel IR Quattro HD DALI

The power supply is an industrial with 16V 240mA DC

[admin]

You need to use a DALI power supply with LM KCD.

Also note that all ballasts (even DALI2) are under the Devices tab, while DALI2 sensors are under the DALI2 tab. You need to run the scan in both tabs to detect all devices.

[joaodaniel.pereira]

Ok,
I'm using the Foxtron DALI power supply. The tridonic (light) driver is working but the other sensor is not detected.. any idea why ?

[admin]

Steinel IR Quattro HD is a stand-alone solution that controls ballasts directly.
You need a different sensor similar to this: https://www.lunatone.com/en/product/dali...tegration/