Hello! yep, gbridge closed their solution. For now you can use IFTTT as alternative (search for the example in this forum).
Another interesting this regarding Google Home is their Local Home SDK which would allow to decrease cloud-based solution delay to minimum. We are currently reviewing integration of this solution into LM directly. Please read more here about Local Home
(03.08.2020, 09:26)edgars Wrote: Hello! yep, gbridge closed their solution. For now you can use IFTTT as alternative (search for the example in this forum).
Another interesting this regarding Google Home is their Local Home SDK which would allow to decrease cloud-based solution delay to minimum. We are currently reviewing integration of this solution into LM directly. Please read more here about Local Home
Thanks Edgars.
I am going to study the link that you have recommended.
We started testing period for Alexa a few weeks ago and we start upcoming week with the testing of Google assistant that will be included in Touch 3 for W4K and sL (:
We started testing period for Alexa a few weeks ago and we start upcoming week with the testing of Google assistant that will be included in Touch 3 for W4K and sL (:
Stay tuned...
BR,
Erwin
Hi Is Google Assistant going to be available at LM either?
LM5Lp, firmware: 2018.08.22 and 2021.12.15, FlashSYS v2, ARMv7 Processor rev 5 (v7l), kernel 4.4.151 and 4.4.259
(21.09.2020, 09:08)Daniel. Wrote: We have our own google assistant app more or less ready but it will wait till our new cloud will go out as both are connected.
Sounds good. Can I participate in betatesting etc in the future?
LM5Lp, firmware: 2018.08.22 and 2021.12.15, FlashSYS v2, ARMv7 Processor rev 5 (v7l), kernel 4.4.151 and 4.4.259
(21.09.2020, 09:08)Daniel. Wrote: We have our own google assistant app more or less ready but it will wait till our new cloud will go out as both are connected.
Hi,
Are there any news / updates regarding GoogleAssistant on LM5?
Same error too.
Got the "could not connect" error.
But, also the Wiser for KNX Android app does not work.
When I open the app and login, I'll get the screen with all the icons, like the: PC/Tablet, Smartphone etc.
When I click it, I'll get an: Error: /lib/genohm-scada/web/vistpl/index.lua:0: bad argument 31 to 'encode' (expected 1 argument)
I added the Pincode option to access the visualisation tool. Don't know if that's the case the GH link won't work?
@MLa, where can you find the Application Note?
08.08.2021, 10:05 (This post was last modified: 08.08.2021, 10:12 by Tee_Trinker.)
It works for me. I tried 3 or 4 times and they connected.
I had already connected to alexa and all devices were also displayed in google. The Wiser for KNX Android app works also.
Most of the problems i had when looking for devices in the alexa app.
cloud or wiser-skill or the alexa app have a problem with special characters like # or Ü or Ö etc ... and the number of devices is apparently limited. I made it to a maximum of 45 devices
maybe you try the alexa app first to see if the cloud connection works.
the alexa app on the android cell phone is right for that too.