How to control the KNX bus via SMS and send notices via SMS?

[admin]

If you want to use API why not use Telegram instead? It's free and easy to configure. See this: https://forum.logicmachine.net/showthrea...1#pid17111

[misterb]

Hello,

with the instruction and files in post 3 I am now able to receive and send sms. THX!
I also managed to reboot via SMS and get back some information (e.g. IP) when sending a sms with "status" as content to LM.

I now want to get back the signal status of the modem via sms.
ASFAIK the AT-Command "AT+CSQ" delivers this information but unfortunately I have no clue how to implement this (my lua and AT-Command skills are not the best ).

Can anyone help?

Thx in advance!

[admin]

1. Modify the user library send function so it returns the command reply/result:

Code:

12345678910111213

-- send command to terminal function AT:send(cmd)   local res, err = self.port:write(cmd .. '\r\n')   local reply   -- write ok, get local echo   if res then     res, err = self:readuntil(cmd)     reply = self:read()   end   return res, err, reply end

2. Add before handler = function(sms) in the resident script:

Code:

123456789101112131415161718192021222324

readcsq = function()     local res, err, reply = modem:send('AT+CSQ')     local rssi     if reply then       rssi = reply:match('%+CSQ:%s+(%d+),(%d+)')     end     rssi = tonumber(rssi) or 0     if 2 <= rssi and rssi <= 9 then       quality = 'marginal'     elseif 10 <= rssi and rssi <= 14 then       quality = 'ok'     elseif 15 <= rssi and rssi <= 19 then       quality = 'good'     elseif 20 <= rssi and rssi <= 30 then       quality = 'excellent'     else       quality = 'unknown'     end   end   csqtime = os.time()

3. Add before udphandler(server) in the resident script:

Code:

1234567

now = os.time()     delta = math.abs(now - csqtime)     if delta >= 15 then       csqtime = now       readcsq()     end

This will read the signal quality every 15 seconds and will set global variable quality that you can use in the SMS reply message.

[misterb]

Works perfect - THX!

[misterb]

Is it possible to change APN via SMS and reconnect to the new APN? I am sure it is but my skills ...

I need this to connect to my LM in case the VPN is down.
Normally I use the APN "internet.telekom, tm ,tm" and do not want to change this default setting (bacause of security reasons) - with this APN you get a private WAN-IP like 10.x.x.x and AFAIK you can not connect to private IPs.
With the APN "internet.t-d1.de, internet, t-d1" you get a non private IP like 32.x.x.x and you can connect to it.

Another point: In the resident script the PIN code needs to be set - either as a number or a object-variable. Is it also possible to get the PIN code out of the system preferences where it usually also has to be set?

THX in advance!