Outside heating cables control 10kW*3

[DanielB]

Hi everybody,

I have an installation with 3. zones outside with 10KW electric underfloor heating for each zone.
I also have a snow sensor connected to a binary input for the knx.

My question is this: is it possible to have an counter for the snow sensor? cause i want that zone 1 is enabled as long as it is snow on the sensor. When sonw is melted i want zone 2 to start exactly as long as the counter says there was snow on the sensor. When that cycle is finished i want zone 3 to start with the same timeleght.

Thank you for answering :-)

Daniel

[Daniel]

Hi
This sound like description of irrigation. You could convert this script for your needs.
https://forum.logicmachine.net/showthrea...84#pid1784
Just make another script which will calculate the time how long the sensor was on and use it as timer.
BR

[DanielB]

Hi
This sound like description of irrigation.  You could convert this script for your needs.
https://forum.logicmachine.net/showthrea...84#pid1784
Just make another script which will calculate the time how long the sensor was on and use it as timer.
BR

Thank you very much:-)

Daniel