json

[balatis]

hi 
in the json modbus, i would like to do divede (/10) the value .
is there fix?
{
"name": "load_output",
"bus_datatype": "14",
"type": "register",
"address": 175,
"writable": "true"
}

thanks

[Erwin van der Zwart]

Hi,

Use this:

Code:

"value_multiplier": 0.1,

BR,

Erwin

[balatis]

Hi,

Use this:

Code:

"value_multiplier": 0.1,

BR,

Erwin

HI  
Erwin not working.

[gtsamis]

Hi,

Use this:

Code:

"value_multiplier": 0.1,

BR,

Erwin

HI  
Erwin not working.

Have you checked your commas? 

Code:

{
"name": "load_output", "bus_datatype": "14", "type": "register", "address": 175, "value_multiplier": 0.1, "writable": "true"
}

[balatis]

Hi,

Use this:

Code:

"value_multiplier": 0.1,

BR,

Erwin

HI  
Erwin not working.

Have you checked your commas? 

Code:

{
"name": "load_output", "bus_datatype": "14", "type": "register", "address": 175, "value_multiplier": 0.1, "writable": "true"
}

Hi Erwin Yes the command is ok .

[admin]

Can you read raw value with RTU read test? Try setting bus datatype as a number without quotes:

Code:

{
"name": "load_output", "bus_datatype": 14, "type": "register", "address": 175, "value_multiplier": 0.1, "writable": true
}

Make sure to create new device from scratch when uploading new profile. Because existing devices will still use old profile data.