Switching sunrise/sunset-dependent light

[lenze90]

Hello, everybody,
i would like to write a script that switches the light independently from sunset or sunrise.

For example:

sunrise + 0 hours
40% Dimming

Sunrise + 2 hours
100% Dimming

Sunrise + 5 hours
100% Dimming

Sunset - 4 hours
100%

Sunset - 2 hours
100%

Sunset - 2 hours
100%

sunset + 0 hours
80% Dimming

Sunset + 1 hour
50% Dimming

Sunset + 2 hours
30% Dimming

Sunset + 3 hours
15 % Dimming

How would the script for this look like? How can I use sunset + sunrise for this?



Thanks a lot
Chris

[Joep]

Easiest way is to you use a scheduler with sunrise / sunset settings.

[lenze90]

Easiest way is to you use a scheduler with sunrise / sunset settings.

i need a script, because the motion detector should switch the light dependent.

i.e. if group address = 1 with motion detector then dependent switching.

[admin]

You can create a virtual object that the scheduler will use. Then create a script that will act as a gate so the value is only written when the motion detector is off.