This forum uses cookies

managementboy · 06.11.2018, 15:55

Hi everyone!

I want to buy this DALI device: http://www.lunatone.com/produkt/dali-2xc...dimmer-cv/
to dimm Tunable White LEDs strips.

it uses the DT8 protocol. Is it possible to run it with the new pre-release firmware of August?

How?

Cheers!

Elkin

***admin*** · 08.11.2018, 08:07

We don't have ballasts to test new DALI features, but the latest FW has support for raw telegrams which can be used to send any kind of DALI telegram. There's also an updated DALI package in the works which has new commands supported. We can provide it for you if you are willing to test it.

managementboy · 17.11.2018, 13:39

(08.11.2018, 08:07)admin Wrote: We don't have ballasts to test new DALI features, but the latest FW has support for raw telegrams which can be used to send any kind of DALI telegram. There's also an updated DALI package in the works which has new commands supported. We can provide it for you if you are willing to test it.

OK, will buy the latest ballasts and we can test them together Big Grin

AEK · (This post was last modified: 28.11.2018, 09:20 by AEK.)

Hi everyone!
i've made tests with Easydim DALI-MIX-DT8 dimmer and its work
you will need to install new dali package (Admin will provide soon)

to set color temp use following script

Code:
require('user.dali')

colortemp = 7000 -- in kelvin

address = 47

mirek = math.floor(1000000 / colortemp)

dtr0 = bit.band(mirek, 0xFF)

dtr1 = bit.band(bit.rshift(mirek, 8), 0xFF) 

dalicmd(1, 'setdtr1', { value = dtr1 })

dalicmd(1, 'setdtr0', { value = dtr0 })

dalicmd(1, 'enabledevicetype', { value = 8 }) 

dalicmd(1, 'setcolortemp', { addrtype = 'short', address = address  }) 

dalicmd(1, 'enabledevicetype', { value = 8 }) 

dalicmd(1, 'activate', { addrtype = 'short', address = address })

to make light warmer use this

Code:
require('user.dali')

dalicmd(1, 'enabledevicetype', { value = 8 })

dalicmd(1, 'colortempwarmer', { addrtype = 'short', address = 47  })

cooler

Code:
require('user.dali')

dalicmd(1, 'enabledevicetype', { value = 8 })

dalicmd(1, 'colortempcooler', { addrtype = 'short', address = 47  })

***Daniel*** · 28.11.2018, 10:12

Hi
Which DT8 control type did you use? As far I remember there are:
- color temperature in Kelvin
- XY coordinate
- RGBW
I'm guessing it is the color temperature.
BR

AEK · 28.11.2018, 10:28

(28.11.2018, 10:12)Daniel. Wrote: Hi
Which DT8 control type did you use? As far I remember there are:
- color temperature in Kelvin
- XY coordinate
- RGBW
I'm guessing it is the color temperature.
BR

this dimmer has cold white and warm white output only. so I use only temp color comands
I have another device DALI-ST-DT8 (RGBW dimmer) and I will try other comands with it.

before this I will try to set color limits

Snoolik · (This post was last modified: 19.12.2018, 12:17 by Snoolik.)

Some functions for Type 8 temperature control

Code:
function getCurrentTc(gateway, addr)

    code = 2 -- parameter code to get current Tc

    res, err = dalicmd(gateway, 'setdtr0', { addrtype = 'short', address = addr, value = code })

    if err then return nil, 'setdtr0 error: ' .. err end

    res, err = dalicmd(gateway, 'enabledevicetype', { addrtype = 'short', address = addr, value = 8 })

    if err then return nil, 'enabledevicetype error: ' .. err end

    res, err = dalicmd(gateway, 'querycolorvalue', { addrtype = 'short', address = addr })

    if err then return nil, 'querycolorvalue error: ' .. err end

    hb = res:byte()

    res, err = dalicmd(gateway, 'querydtr0', { addrtype = 'short', address = addr })

    if err then return nil, 'querydtr0 error: ' .. err end

    lb = res:byte()

    mirek = bit.lshift(hb, 8) + lb

    tc = 1000000 / mirek

    return tc

end

function getCoolestTcLimit(gateway, addr)

    code = 128 -- parameter code to get coolest Tc limit

    res, err = dalicmd(gateway, 'setdtr0', { addrtype = 'short', address = addr, value = code })

    if err then return nil, 'setdtr0 error: ' .. err end

    res, err = dalicmd(gateway, 'enabledevicetype', { addrtype = 'short', address = addr, value = 8 })

    if err then return nil, 'enabledevicetype error: ' .. err end

    res, err = dalicmd(gateway, 'querycolorvalue', { addrtype = 'short', address = addr })

    if err then return nil, 'querycolorvalue error: ' .. err end

    hb = res:byte()

    res, err = dalicmd(gateway, 'querydtr0', { addrtype = 'short', address = addr })

    if err then return nil, 'querydtr0 error: ' .. err end

    lb = res:byte()

    mirek = bit.lshift(hb, 8) + lb

    tc = 1000000 / mirek

    return tc

end

function getCoolestTcLimitPhys(gateway, addr)

    code = 129 -- parameter code to get coolest Tc physical limit

    res, err = dalicmd(gateway, 'setdtr0', { addrtype = 'short', address = addr, value = code })

    if err then return nil, 'setdtr0 error: ' .. err end

    res, err = dalicmd(gateway, 'enabledevicetype', { addrtype = 'short', address = addr, value = 8 })

    if err then return nil, 'enabledevicetype error: ' .. err end

    res, err = dalicmd(gateway, 'querycolorvalue', { addrtype = 'short', address = addr })

    if err then return nil, 'querycolorvalue error: ' .. err end

    hb = res:byte()

    res, err = dalicmd(gateway, 'querydtr0', { addrtype = 'short', address = addr })

    if err then return nil, 'querydtr0 error: ' .. err end

    lb = res:byte()

    mirek = bit.lshift(hb, 8) + lb

    tc = 1000000 / mirek

    return tc

end

function getWarmestTcLimit(gateway, addr)

    code = 130 -- parameter code to get warmest Tc limit

    res, err = dalicmd(gateway, 'setdtr0', { addrtype = 'short', address = addr, value = code })

    if err then return nil, 'setdtr0 error: ' .. err end

    res, err = dalicmd(gateway, 'enabledevicetype', { addrtype = 'short', address = addr, value = 8 })

    if err then return nil, 'enabledevicetype error: ' .. err end

    res, err = dalicmd(gateway, 'querycolorvalue', { addrtype = 'short', address = addr })

    if err then return nil, 'querycolorvalue error: ' .. err end

    hb = res:byte()

    res, err = dalicmd(gateway, 'querydtr0', { addrtype = 'short', address = addr })

    if err then return nil, 'querydtr0 error: ' .. err end

    lb = res:byte()

    mirek = bit.lshift(hb, 8) + lb

    tc = 1000000 / mirek

    return tc

end

function getWarmestTcLimitPhys(gateway, addr)

    code = 131 -- parameter code to get warmest Tc physical limit

    res, err = dalicmd(gateway, 'setdtr0', { addrtype = 'short', address = addr, value = code })

    if err then return nil, 'setdtr0 error: ' .. err end

    res, err = dalicmd(gateway, 'enabledevicetype', { addrtype = 'short', address = addr, value = 8 })

    if err then return nil, 'enabledevicetype error: ' .. err end

    res, err = dalicmd(gateway, 'querycolorvalue', { addrtype = 'short', address = addr })

    if err then return nil, 'querycolorvalue error: ' .. err end

    hb = res:byte()

    res, err = dalicmd(gateway, 'querydtr0', { addrtype = 'short', address = addr })

    if err then return nil, 'querydtr0 error: ' .. err end

    lb = res:byte()

    mirek = bit.lshift(hb, 8) + lb

    tc = 1000000 / mirek

    return tc

end

function setWarmestTcLimit(gateway, addr, tc)

    code = 1 -- parameter code to set warmest Tc limit

    res, err = dalicmd(gateway, 'setdtr2', { addrtype = 'short', address = addr, value = code })

    if err then return nil, 'setdtr2 error: ' .. err end

    mirek = math.floor(1000000 / tc)

    dtr0 = bit.band(mirek, 0xff)

    dtr1 = bit.rshift(bit.band(mirek, 0xff00), 8)

    res, err = dalicmd(gateway, 'setdtr0', { addrtype = 'short', address = addr, value = dtr0 })

    if err then return nil, 'setdtr2 error: ' .. err end

    res, err = dalicmd(gateway, 'setdtr1', { addrtype = 'short', address = addr, value = dtr1 })

    if err then return nil, 'setdtr2 error: ' .. err end

    res, err = dalicmd(gateway, 'enabledevicetype', { addrtype = 'short', address = addr, value = 8 })

    if err then return nil, 'enabledevicetype error: ' .. err end

    res, err = dalicmd(gateway, 'storecolortemplimit', { addrtype = 'short', address = addr })

    if err then return nil, 'storecolortemplimit error: ' .. err end

    res, err = dalicmd(gateway, 'storecolortemplimit', { addrtype = 'short', address = addr })

    return res, err

end

function setCoolestTcLimit(gateway, addr, tc)

    code = 0 -- parameter code to set coolest Tc limit

    res, err = dalicmd(gateway, 'setdtr2', { addrtype = 'short', address = addr, value = code })

    if err then return nil, 'setdtr2 error: ' .. err end

    mirek = math.floor(1000000 / tc)

    dtr0 = bit.band(mirek, 0xff)

    dtr1 = bit.rshift(bit.band(mirek, 0xff00), 8)

    res, err = dalicmd(gateway, 'setdtr0', { addrtype = 'short', address = addr, value = dtr0 })

    if err then return nil, 'setdtr2 error: ' .. err end

    res, err = dalicmd(gateway, 'setdtr1', { addrtype = 'short', address = addr, value = dtr1 })

    if err then return nil, 'setdtr2 error: ' .. err end

    res, err = dalicmd(gateway, 'enabledevicetype', { addrtype = 'short', address = addr, value = 8 })

    if err then return nil, 'enabledevicetype error: ' .. err end

    res, err = dalicmd(gateway, 'storecolortemplimit', { addrtype = 'short', address = addr })

    if err then return nil, 'storecolortemplimit error: ' .. err end

    res, err = dalicmd(gateway, 'storecolortemplimit', { addrtype = 'short', address = addr })

    return res, err

end

function saveSceneTc(gateway, addr, tc, arc_level, scene)

    -- Save scene with saved Tc and Arc level

    mirek = math.floor(1000000/tc)

    dtr0 = bit.band(mirek, 0xff)

    dtr1 = bit.rshift(bit.band(mirek, 0xff00), 8)

    res, err = dalicmd(gateway, 'setdtr1', { addrtype = 'short', address = addr, value = dtr1 })

    if err then return nil, 'setdtr1 tc error: ' .. err end

    res, err = dalicmd(gateway, 'setdtr0', { addrtype = 'short', address = addr, value = dtr0 })

    if err then return nil, 'setdtr0 tc error: ' .. err end

    res, err = dalicmd(gateway, 'enabledevicetype', { addrtype = 'short', address = addr, value = 8 })

    if err then return nil, 'enabledevicetype error: ' .. err end

    res, err = dalicmd(gateway, 'setcolortemp', { addrtype = 'short', address = addr })

    if err then return nil, 'setcolortemp error: ' .. err end

    res, err = dalicmd(gateway, 'setdtr0', { addrtype = 'short', address = addr, value = arc_level })

    if err then return nil, 'setdtr0 arc_level error: ' .. err end

    res, err = dalicmd(gateway, 'storescene', { addrtype = 'short', address = addr, value = scene })

    if err then return nil, 'storescene error: ' .. err end

    res, err = dalicmd(gateway, 'storescene', { addrtype = 'short', address = addr, value = scene })

    if err then return nil, 'storescene error: ' .. err end

    return res, err

end

function getSupportedColorTypeFeatures(gateway, addr)

    -- Get supported color type features

    -- Return pattern:

    -- If successful:

    -- xy - 0/1, unsupported/supported

    -- tc - 0/1, unsupported/supported

    -- direct - 0-5, how much channels support direct control

    -- rgbwaf - 0-5, how much rgbwaf channels

    -- else: nil, Command name with error

    res, err = dalicmd(gateway, 'enabledevicetype', { addrtype = 'short', address = addr, value = 8 })

    if err then return nil, 'enabledevicetype error: ' .. err end

    res, err = dalicmd(gateway, 'querycolorfeatures', { addrtype = 'short', address = addr })

    if err then return nil, 'querycolorfeatures error: ' .. err end

    res = res:byte()

    xy = bit.band(res, 0x01)

    tc = bit.rshift(bit.band(res, 0x02), 1)

    direct = bit.rshift(bit.band(res, 0x1c), 2)

    rgbwaf = bit.rshift(bit.band(res, 0xe0), 5)

    return xy, tc, direct, rgbwaf

end

function getSceneTc(gateway, addr, scene)

    res, err = dalicmd(gateway, 'queryscene', { addrtype = 'short', address = addr, value = scene })

    if err then return nil, 'queryscene error: ' .. err end

    arc_level = res:byte()

    code = 226 -- parameter code to get scene Tc

    res, err = dalicmd(gateway, 'setdtr0', { addrtype = 'short', address = addr, value = code })

    if err then return nil, 'setdtr0 error: ' .. err end

    res, err = dalicmd(gateway, 'enabledevicetype', { addrtype = 'short', address = addr, value = 8 })

    if err then return nil, 'enabledevicetype error: ' .. err end

    res, err = dalicmd(gateway, 'querycolorvalue', { addrtype = 'short', address = addr })

    if err then return nil, 'querycolorvalue error: ' .. err end

    hb = res:byte()

    res, err = dalicmd(gateway, 'querydtr0', { addrtype = 'short', address = addr })

    if err then return nil, 'querydtr0 error: ' .. err end

    lb = res:byte()

    mirek = bit.lshift(hb, 8) + lb

    tc = 1000000 / mirek

    return arc_level, tc

end

Snoolik · (This post was last modified: 10.01.2020, 07:26 by Snoolik.)

Function for RGBW/RGBWAF Type 8 dimmer

Code:
function setRGBWAF(gateway, addr, r, g, b, w, a, f)

    if r == nil then r = 0 end

    if g == nil then g = 0 end

    if b == nil then b = 0 end

    if w == nil then w = 0 end

    if a == nil then a = 0 end

    if f == nil then f = 0 end

    res, err = dalicmd(gateway, 'setdtr0', { addrtype = 'short', address = addr, value = math.min(r, 254) })

    if err then return nil, 'setdtr0 error: ' .. err end

    res, err = dalicmd(gateway, 'setdtr1', { addrtype = 'short', address = addr, value = math.min(g, 254) })

    if err then return nil, 'setdtr1 error: ' .. err end

    res, err = dalicmd(gateway, 'setdtr2', { addrtype = 'short', address = addr, value = math.min(b, 254) })

    if err then return nil, 'setdtr2 error: ' .. err end

    res, err = dalicmd(gateway, 'enabledevicetype', { addrtype = 'short', address = addr, value = 8 })

    if err then return nil, 'enabledevicetype error: ' .. err end

    res, err = dalicmd(gateway, 'setrgbdimlevel', { addrtype = 'short', address = addr })

    if err then return nil, 'setrgbdimlevel error: ' .. err end

    res, err = dalicmd(gateway, 'setdtr0', { addrtype = 'short', address = addr, value = math.min(w, 254) })

    if err then return nil, 'setdtr0 error: ' .. err end

    res, err = dalicmd(gateway, 'setdtr1', { addrtype = 'short', address = addr, value = math.min(a, 254) })

    if err then return nil, 'setdtr1 error: ' .. err end

    res, err = dalicmd(gateway, 'setdtr2', { addrtype = 'short', address = addr, value = math.min(f, 254) })

    if err then return nil, 'setdtr2 error: ' .. err end

    res, err = dalicmd(gateway, 'enabledevicetype', { addrtype = 'short', address = addr, value = 8 })

    if err then return nil, 'enabledevicetype error: ' .. err end

    res, err = dalicmd(gateway, 'setwafdimlevel', { addrtype = 'short', address = addr })

    if err then return nil, 'setwafdimlevel error: ' .. err end

    res, err = dalicmd(gateway, 'enabledevicetype', { addrtype = 'short', address = addr, value = 8 })

    if err then return nil, 'enabledevicetype error: ' .. err end

    res, err = dalicmd(gateway, 'activate', { addrtype = 'short', address = addr })

    return res, err

end

function saveSceneRGBWAF(gateway, addr, scene, arc_level, r, g, b, w, a, f)

    if r == nil then r = 0 end

    if g == nil then g = 0 end

    if b == nil then b = 0 end

    if w == nil then w = 0 end

    if a == nil then a = 0 end

    if f == nil then f = 0 end

    if arc_level == nil then arc_level = 254 end

    res, err = dalicmd(gateway, 'setdtr0', { addrtype = 'short', address = addr, value = math.min(r, 254) })

    if err then return nil, 'setdtr0 error: ' .. err end

    res, err = dalicmd(gateway, 'setdtr1', { addrtype = 'short', address = addr, value = math.min(g, 254) })

    if err then return nil, 'setdtr1 error: ' .. err end

    res, err = dalicmd(gateway, 'setdtr2', { addrtype = 'short', address = addr, value = math.min(b, 254) })

    if err then return nil, 'setdtr2 error: ' .. err end

    res, err = dalicmd(gateway, 'enabledevicetype', { addrtype = 'short', address = addr, value = 8 })

    if err then return nil, 'enabledevicetype error: ' .. err end

    res, err = dalicmd(gateway, 'setrgbdimlevel', { addrtype = 'short', address = addr })

    if err then return nil, 'setrgbdimlevel error: ' .. err end

    res, err = dalicmd(gateway, 'setdtr0', { addrtype = 'short', address = addr, value = math.min(w, 254) })

    if err then return nil, 'setdtr0 error: ' .. err end

    res, err = dalicmd(gateway, 'setdtr1', { addrtype = 'short', address = addr, value = math.min(a, 254) })

    if err then return nil, 'setdtr1 error: ' .. err end

    res, err = dalicmd(gateway, 'setdtr2', { addrtype = 'short', address = addr, value = math.min(f, 254) })

    if err then return nil, 'setdtr2 error: ' .. err end

    res, err = dalicmd(gateway, 'enabledevicetype', { addrtype = 'short', address = addr, value = 8 })

    if err then return nil, 'enabledevicetype error: ' .. err end

    res, err = dalicmd(gateway, 'setwafdimlevel', { addrtype = 'short', address = addr })

    if err then return nil, 'setwafdimlevel error: ' .. err end

    res, err = dalicmd(gateway, 'setdtr0', { addrtype = 'short', address = addr, value = arc_level })

    if err then return nil, 'setdtr0 error: ' .. err end

    res, err = dalicmd(gateway, 'storescene', { addrtype = 'short', address = addr, value = scene })

    if err then return nil, 'storescene error: ' .. err end

    res, err = dalicmd(gateway, 'storescene', { addrtype = 'short', address = addr, value = scene })

    return res, err

end

Snoolik · 08.05.2019, 09:48

Functions to get current RGBWAF:

Code:
function getChannel(gateway, addr, code)

  res, err = dalicmd(gateway, 'setdtr0', { addrtype = 'short', address = addr, value = code })

  if err then return nil, 'setdtr0 error: ' .. err end

  res, err = dalicmd(gateway, 'enabledevicetype', { addrtype = 'short', address = addr, value = 8 })

  if err then return nil, 'enabledevicetype error: ' .. err end

  res, err = dalicmd(gateway, 'querycolorvalue', { addrtype = 'short', address = addr })

  return res, err

end

function getRGBWAF(gateway, addr)

  -- codes for RGBWAF could be 233-237 or 227-232

  res_t = {}

  for i = 233, 237, 1 do

    res, err = getChannel(gateway, addr, i)

    if res then table.insert(res_t, res:byte()) end

  end

  return res_t

end

khalil · 06.07.2021, 09:58

(26.12.2018, 12:22)Snoolik Wrote: Function for RGBW/RGBWAF Type 8 dimmer

Code:
function setRGBWAF(gateway, addr, r, g, b, w, a, f) if r == nil then r = 0 end if g == nil then g = 0 end if b == nil then b = 0 end if w == nil then w = 0 end if a == nil then a = 0 end if f == nil then f = 0 end res, err = dalicmd(gateway, 'setdtr0', { addrtype = 'short', address = addr, value = math.min(r, 254) }) if err then return nil, 'setdtr0 error: ' .. err end res, err = dalicmd(gateway, 'setdtr1', { addrtype = 'short', address = addr, value = math.min(g, 254) }) if err then return nil, 'setdtr1 error: ' .. err end res, err = dalicmd(gateway, 'setdtr2', { addrtype = 'short', address = addr, value = math.min(b, 254) }) if err then return nil, 'setdtr2 error: ' .. err end res, err = dalicmd(gateway, 'enabledevicetype', { addrtype = 'short', address = addr, value = 8 }) if err then return nil, 'enabledevicetype error: ' .. err end res, err = dalicmd(gateway, 'setrgbdimlevel', { addrtype = 'short', address = addr }) if err then return nil, 'setrgbdimlevel error: ' .. err end res, err = dalicmd(gateway, 'setdtr0', { addrtype = 'short', address = addr, value = math.min(w, 254) }) if err then return nil, 'setdtr0 error: ' .. err end res, err = dalicmd(gateway, 'setdtr1', { addrtype = 'short', address = addr, value = math.min(a, 254) }) if err then return nil, 'setdtr1 error: ' .. err end res, err = dalicmd(gateway, 'setdtr2', { addrtype = 'short', address = addr, value = math.min(f, 254) }) if err then return nil, 'setdtr2 error: ' .. err end res, err = dalicmd(gateway, 'enabledevicetype', { addrtype = 'short', address = addr, value = 8 }) if err then return nil, 'enabledevicetype error: ' .. err end res, err = dalicmd(gateway, 'setwafdimlevel', { addrtype = 'short', address = addr }) if err then return nil, 'setwafdimlevel error: ' .. err end res, err = dalicmd(gateway, 'enabledevicetype', { addrtype = 'short', address = addr, value = 8 }) if err then return nil, 'enabledevicetype error: ' .. err end res, err = dalicmd(gateway, 'activate', { addrtype = 'short', address = addr }) return res, err end function saveSceneRGBWAF(gateway, addr, scene, arc_level, r, g, b, w, a, f) if r == nil then r = 0 end if g == nil then g = 0 end if b == nil then b = 0 end if w == nil then w = 0 end if a == nil then a = 0 end if f == nil then f = 0 end if arc_level == nil then arc_level = 254 end res, err = dalicmd(gateway, 'setdtr0', { addrtype = 'short', address = addr, value = math.min(r, 254) }) if err then return nil, 'setdtr0 error: ' .. err end res, err = dalicmd(gateway, 'setdtr1', { addrtype = 'short', address = addr, value = math.min(g, 254) }) if err then return nil, 'setdtr1 error: ' .. err end res, err = dalicmd(gateway, 'setdtr2', { addrtype = 'short', address = addr, value = math.min(b, 254) }) if err then return nil, 'setdtr2 error: ' .. err end res, err = dalicmd(gateway, 'enabledevicetype', { addrtype = 'short', address = addr, value = 8 }) if err then return nil, 'enabledevicetype error: ' .. err end res, err = dalicmd(gateway, 'setrgbdimlevel', { addrtype = 'short', address = addr }) if err then return nil, 'setrgbdimlevel error: ' .. err end res, err = dalicmd(gateway, 'setdtr0', { addrtype = 'short', address = addr, value = math.min(w, 254) }) if err then return nil, 'setdtr0 error: ' .. err end res, err = dalicmd(gateway, 'setdtr1', { addrtype = 'short', address = addr, value = math.min(a, 254) }) if err then return nil, 'setdtr1 error: ' .. err end res, err = dalicmd(gateway, 'setdtr2', { addrtype = 'short', address = addr, value = math.min(f, 254) }) if err then return nil, 'setdtr2 error: ' .. err end res, err = dalicmd(gateway, 'enabledevicetype', { addrtype = 'short', address = addr, value = 8 }) if err then return nil, 'enabledevicetype error: ' .. err end res, err = dalicmd(gateway, 'setwafdimlevel', { addrtype = 'short', address = addr }) if err then return nil, 'setwafdimlevel error: ' .. err end res, err = dalicmd(gateway, 'setdtr0', { addrtype = 'short', address = addr, value = arc_level }) if err then return nil, 'setdtr0 error: ' .. err end res, err = dalicmd(gateway, 'storescene', { addrtype = 'short', address = addr, value = scene }) if err then return nil, 'storescene error: ' .. err end res, err = dalicmd(gateway, 'storescene', { addrtype = 'short', address = addr, value = scene }) return res, err end

Hello and thanks for your efforts.
first in the setRGBWAF function what are (gateway, addr), and how to convert the 251.600 6 byte DALI RGBW data type to fit the function (r,g,b,w,a,f)

regards,

***admin*** · 06.07.2021, 10:58

Use this, change gateway number and short address as needed:

Code:
gateway = 'internal'

addr = 12

require('user.dali')

value = event.getvalue()

function setRGBWAF(gateway, addr, r, g, b, w, a, f)

    if r == nil then r = 0 end

    if g == nil then g = 0 end

    if b == nil then b = 0 end

    if w == nil then w = 0 end

    if a == nil then a = 0 end

    if f == nil then f = 0 end

    res, err = dalicmd(gateway, 'setdtr0', { addrtype = 'short', address = addr, value = math.min(r, 254) })

    if err then return nil, 'setdtr0 error: ' .. err end

    res, err = dalicmd(gateway, 'setdtr1', { addrtype = 'short', address = addr, value = math.min(g, 254) })

    if err then return nil, 'setdtr1 error: ' .. err end

    res, err = dalicmd(gateway, 'setdtr2', { addrtype = 'short', address = addr, value = math.min(b, 254) })

    if err then return nil, 'setdtr2 error: ' .. err end

    res, err = dalicmd(gateway, 'enabledevicetype', { addrtype = 'short', address = addr, value = 8 })

    if err then return nil, 'enabledevicetype error: ' .. err end

    res, err = dalicmd(gateway, 'setrgbdimlevel', { addrtype = 'short', address = addr })

    if err then return nil, 'setrgbdimlevel error: ' .. err end

    res, err = dalicmd(gateway, 'setdtr0', { addrtype = 'short', address = addr, value = math.min(w, 254) })

    if err then return nil, 'setdtr0 error: ' .. err end

    res, err = dalicmd(gateway, 'setdtr1', { addrtype = 'short', address = addr, value = math.min(a, 254) })

    if err then return nil, 'setdtr1 error: ' .. err end

    res, err = dalicmd(gateway, 'setdtr2', { addrtype = 'short', address = addr, value = math.min(f, 254) })

    if err then return nil, 'setdtr2 error: ' .. err end

    res, err = dalicmd(gateway, 'enabledevicetype', { addrtype = 'short', address = addr, value = 8 })

    if err then return nil, 'enabledevicetype error: ' .. err end

    res, err = dalicmd(gateway, 'setwafdimlevel', { addrtype = 'short', address = addr })

    if err then return nil, 'setwafdimlevel error: ' .. err end

    res, err = dalicmd(gateway, 'enabledevicetype', { addrtype = 'short', address = addr, value = 8 })

    if err then return nil, 'enabledevicetype error: ' .. err end

    res, err = dalicmd(gateway, 'activate', { addrtype = 'short', address = addr })

    return res, err

end

setRGBWAF(gateway, addr, value.red, value.green, value.blue, value.white)

khalil · (This post was last modified: 06.07.2021, 11:28 by khalil.)

(06.07.2021, 10:58)admin Wrote: Use this, change gateway number and short address as needed:

Code:
gateway = 'internal' addr = 12 require('user.dali') value = event.getvalue() function setRGBWAF(gateway, addr, r, g, b, w, a, f) if r == nil then r = 0 end if g == nil then g = 0 end if b == nil then b = 0 end if w == nil then w = 0 end if a == nil then a = 0 end if f == nil then f = 0 end res, err = dalicmd(gateway, 'setdtr0', { addrtype = 'short', address = addr, value = math.min(r, 254) }) if err then return nil, 'setdtr0 error: ' .. err end res, err = dalicmd(gateway, 'setdtr1', { addrtype = 'short', address = addr, value = math.min(g, 254) }) if err then return nil, 'setdtr1 error: ' .. err end res, err = dalicmd(gateway, 'setdtr2', { addrtype = 'short', address = addr, value = math.min(b, 254) }) if err then return nil, 'setdtr2 error: ' .. err end res, err = dalicmd(gateway, 'enabledevicetype', { addrtype = 'short', address = addr, value = 8 }) if err then return nil, 'enabledevicetype error: ' .. err end res, err = dalicmd(gateway, 'setrgbdimlevel', { addrtype = 'short', address = addr }) if err then return nil, 'setrgbdimlevel error: ' .. err end res, err = dalicmd(gateway, 'setdtr0', { addrtype = 'short', address = addr, value = math.min(w, 254) }) if err then return nil, 'setdtr0 error: ' .. err end res, err = dalicmd(gateway, 'setdtr1', { addrtype = 'short', address = addr, value = math.min(a, 254) }) if err then return nil, 'setdtr1 error: ' .. err end res, err = dalicmd(gateway, 'setdtr2', { addrtype = 'short', address = addr, value = math.min(f, 254) }) if err then return nil, 'setdtr2 error: ' .. err end res, err = dalicmd(gateway, 'enabledevicetype', { addrtype = 'short', address = addr, value = 8 }) if err then return nil, 'enabledevicetype error: ' .. err end res, err = dalicmd(gateway, 'setwafdimlevel', { addrtype = 'short', address = addr }) if err then return nil, 'setwafdimlevel error: ' .. err end res, err = dalicmd(gateway, 'enabledevicetype', { addrtype = 'short', address = addr, value = 8 }) if err then return nil, 'enabledevicetype error: ' .. err end res, err = dalicmd(gateway, 'activate', { addrtype = 'short', address = addr }) return res, err end setRGBWAF(gateway, addr, value.red, value.green, value.blue, value.white)

thank you, admin
Great
can I read the RGBW Status?

***admin*** · 06.07.2021, 11:35

See this example: https://forum.logicmachine.net/showthrea...2#pid12902

khalil · (This post was last modified: 07.07.2021, 14:39 by khalil.)

(06.07.2021, 11:35)admin Wrote: See this example: https://forum.logicmachine.net/showthrea...2#pid12902

thank you admin for your great help and effort.
I do it like this and its wok
if you have any comments Smile

RgbwSts = getRGBWAF(gateway, addr)

WriteValue = {}
WriteValue["red"] = RgbwSts[1]
WriteValue["white"] = RgbwSts[4]
WriteValue["blue"] = RgbwSts[3]
WriteValue["green"] = RgbwSts[2]

Also, I need the feedback for the on/off object and scale(0-100%)

regards,

***admin*** · 07.07.2021, 14:39

See this: https://forum.logicmachine.net/showthrea...8#pid19988

khalil · 08.07.2021, 10:52

(07.07.2021, 14:39)admin Wrote: See this: https://forum.logicmachine.net/showthrea...8#pid19988

thank you, admin

What is the right way to control a group of DALI Lights/short addresses at the same time?

***admin*** · 08.07.2021, 10:57

See this: https://forum.logicmachine.net/showthread.php?tid=133
I also recommend looking into our CANx-DALI gateway. It provides most of the features you need via UI instead of scripts.

khalil · 08.07.2021, 11:23

(08.07.2021, 10:57)admin Wrote: See this: https://forum.logicmachine.net/showthread.php?tid=133
I also recommend looking into our CANx-DALI gateway. It provides most of the features you need via UI instead of scripts.

Thank you, admin
I will, but for this project, we already bought the products and give a price for the customer, unfortunately we didn't test everything before Sad

Login
Username:
Password:	Lost Password?
	Remember me