problem when importing WISER with Fujitsu UTY-VKGX devices

[stawros]

There is a problem when importing the project to WISER
After adding the Fujitsu UTY-VKGX devices to the project in ETS, importing the project fails - error page. It seems that it is related to the file size of this device. Is there a vitamin known for this?, how to solve this problem ?

https://www.fujitsu-general.com/g-eu/pro...-vkgx.html

[Daniel]

Which HW version do you use? You can always do esf import.

[stawros]

HW: Wiser for KNX (i.MX6)
SW: 2.6.2

When I finished designing in ETS, I found out that I cannot import the project, I lost a lot of time to find the reason. I wonder why this particular device is causing the problem.
I solved it like this: I create a temporary new project and only copy group addresses to it, and such a lean project (without devices) can be imported. It's a bit of a hassle.

[Daniel]

HW version is on the side label. Just check how much Total System memory you have. It is System Status.

[stawros]

V3.1
Total system memory 249.0M
Used 16.9M (7%)
Free 232.1M (93%)
Buffered 7.3M
Cached 11.0M

[Daniel]

OK, this is a surprise, how big is he project?

[stawros]

When I was looking for the reason, I noticed that it is enough to add only this device to the naked project and the project cannot be imported anymore.

[Daniel]

If you can send to pm your project and we will look in to it.

[admin]

This is due to a large device description file in the project which causes browser tab crash. This only affects Chrome/Edge but not Firefox. A work-around fix will be implemented in the next firmware.

[stawros]

Which HW version do you use?  You can always do esf import.

This is due to a large device description file in the project which causes browser tab crash. This only affects Chrome/Edge but not Firefox. A work-around fix will be implemented in the next firmware.

Hey, great it works on firefox, until i fix it i'll be running on firefox. Thanks, have a nice day.