Zigbee gateway integration

[CarlS]

LM5 M4 does not have RS232, only 2x RS485.

My fault..
Wrong firmware on LM5.
It is a LM5p2-PMC, and with firmware "LM5 Lite + Ext" everything is working fine.

Thanks a lot

[Sjef de Laat]

Is it possible to Add a profile for this Device, harder and softer does work, but it is not possible to adjust the collors, but you can do so on the lamp?

With Homey I can adjust the colors with RGB or color temperature.


IKEA of Sweden - TRADFRI bulb GU10 CWS 345lm - device information


Manufacturer: IKEA of Sweden
Model: TRADFRI bulb GU10 CWS 345lm
Firmware version: 1.0.021

Device type: Router
Power source: Mains
Receive when idle: Yes

Endpoint 1
Profile: 260
Input clusters
- Basic (0)
- Identify (3)
- Groups (4)
- Scenes (5)
- OnOff (6)
- LevelCtrl (8)
- LightingColorCtrl (768)
- HaDiagnostic (2821)
- LightLink (4096)
- 64636
Output clusters
- Ota (25)

Endpoint 242
Profile: 41440
Output clusters
- GreenPower (33)

Reported attributes
- level: 30
- onoff: true

[admin]

Profile for TRADFRI bulb GU10 CWS 345lm will be added in the next app version.

[a455115]

Hello everyone!
I see there's a new option in the zigbee app - Add install code, could it be that we can now add profiles ourselves? Does anyone know how it works?

[admin]

Install code is a security feature. Some devices require using an install code for pairing. Check this link for more info: https://www.silabs.com/documents/public/...evices.pdf

[domotiqa]

hi,
any hope to have this device include.
https://www.amazon.fr/gp/product/B087QSD...UTF8&psc=1
https://www.amazon.fr/Woox-701136-T%C3%A...989&sr=8-7

Interresting 4 buton remote that can be attach to key.
Only batterie value received

https://zigbee.blakadder.com/Nedis_ZBRC10WT.html
https://gist.github.com/nksglns/a0cc110f...c5b1ce7e44

Code:

1234567891011121314151617

Manufacturer: _TZ3000_fsiepnrh Model: TS0215A Device type: End device Power source: Battery Receive when idle: No Endpoint 1 Profile: 260 Input clusters - Basic (0) - PowerCfg (1) - SsIasZone (1280) - SsIasAce (1281) Output clusters - Ota (25) - Time (10)

The four buton are:

Code:

1234

> arm_day_zones > arm_all_zones > disarm > emergency

Code:

1234567891011

        "TuyaKeyfobMap": {             "vendor": "Woox",             "doc": "4 button remotes from Woox and Nedis",             "modelids": ["_TZ3000_0zrccfgx", "_TZ3000_fsiepnrh"],             "map": [                 [1, "0x01", "IAS_ACE", "ARM", "1", "S_BUTTON_1", "S_BUTTON_ACTION_SHORT_RELEASED", "Arm day/home zones only"],                 [1, "0x01", "IAS_ACE", "ARM", "0", "S_BUTTON_2", "S_BUTTON_ACTION_SHORT_RELEASED", "Disarm"],                 [1, "0x01", "IAS_ACE", "EMERGENCY", "0", "S_BUTTON_3", "S_BUTTON_ACTION_SHORT_RELEASED", "Emergency"],                 [1, "0x01", "IAS_ACE", "ARM", "3", "S_BUTTON_4", "S_BUTTON_ACTION_SHORT_RELEASED", "Arm all zones"]             ]         },

This I'm nnot sure

 

Code:

12345678910

      "samjinButtonMap": {             "vendor": "Samjin",             "doc": "Remote",             "modelids": ["button"],             "map": [                 [1, "0x01", "IAS_ZONE", "STATUS_CHANGE", "0x01", "S_BUTTON_1", "S_BUTTON_ACTION_SHORT_RELEASED", "Single press"],                 [1, "0x01", "IAS_ZONE", "STATUS_CHANGE", "0x02", "S_BUTTON_1", "S_BUTTON_ACTION_DOUBLE_PRESS", "Double press"],                 [1, "0x01", "IAS_ZONE", "STATUS_CHANGE", "0x03", "S_BUTTON_1", "S_BUTTON_ACTION_HOLD", "Hold"]             ]         },

log:

Code:

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102

[2023-11-07 17:59:36] ZB: sending ZCL message to broadcast, cluster 0021: { FrameControl = [ "FrameTypeLocal", "DirectionFromServer", "DisableDefaultResponse" ], TransactionSequenceNumber = 22, GreenPowerClusterFrame = { CommandIdentifier = "GPCommMode", GPCommMode = { CommisioningWindow = 0, Options = 10 } } } [2023-11-07 17:59:36] CC: sending SREQ_AF_DATA_REQUEST_EXT, data: { Data = [ 25, 22, 2, 10, 0, 0 ], Options = [  ], ClusterId = 33, DstEndpoint = 242, Radius = 30, DstPanId = 0, DstAddrMode = "Addr16Bit", DstAddr = "000000000000FFFD", TransId = 162, SrcEndpoint = 242 } [2023-11-07 17:59:36] ZNP: sending request: [31] FE 1A 24 02 02 FD FF 00 00 00 00 00 00 F2 00 00 F2 21 00 A2 00 1E 06 00 19 16 02 0A 00 00 A0 [2023-11-07 17:59:36] CC: MT type AREQ (2), subsystem ZDO (0x05), command id 0xB6, data: [5] 45 B6 00 00 00 [2023-11-07 17:59:36] CC: MT command AREQ_ZDO_MGMT_PERMIT_JOIN_RSP, payload: { SrcAddr = 0, Status = 0 } [2023-11-07 17:59:36] CC: MT type SRSP (3), subsystem AF (0x04), command id 0x02, data: [3] 64 02 00 [2023-11-07 17:59:36] CC: MT command SRSP_AF_DATA_REQUEST_EXT, payload: { Status = 0 } [2023-11-07 17:59:36] CC: MT type AREQ (2), subsystem AF (0x04), command id 0x80, data: [5] 44 80 00 F2 A2 [2023-11-07 17:59:36] CC: MT command AREQ_AF_DATA_CONFIRM, payload: { Status = 0, TransId = 162, Endpoint = 242 } [2023-11-07 17:59:38] CC: MT type AREQ (2), subsystem AF (0x04), command id 0x81, data: [25] 44 81 00 00 01 05 89 EF 01 01 00 24 00 66 6F 0A 00 00 03 01 76 02 89 EF 1D [2023-11-07 17:59:38] CC: MT command AREQ_AF_INCOMING_MSG, payload: { LinkQuality = 36, Data = [ 1, 118, 2 ], SrcAddr = 61321, SecurityUse = 0, Radius = 29, ClusterId = 1281, SrcEndpoint = 1, MacSrcAddr = 61321, GroupId = 0, TransSeqNumber = 0, Timestamp = 683878, DstEndpoint = 1, WasBroadcast = 0 } [2023-11-07 17:59:38] CC: incoming message from EF89, cluster 0501, dst EP 1 [2023-11-07 17:59:38] ZB: packet from bc33acfffe619e4e: { FrameControl = [ "FrameTypeLocal", "DirectionToServer" ], TransactionSequenceNumber = 118 } [2023-11-07 17:59:38] ZB: sending ZCL message to bc33acfffe619e4e, cluster 0501: { FrameControl = [ "FrameTypeGlobal", "DirectionFromServer", "DisableDefaultResponse" ], TransactionSequenceNumber = 118, GeneralCommandFrame = { CommandIdentifier = "DefaultResponse", DefaultResponse = { Status = "SUCCESS", CommandIdentifier = 2 } } } [2023-11-07 17:59:38] CC: sending SREQ_AF_DATA_REQUEST, data: { ClusterId = 1281, DstEndpoint = 1, Data = [ 24, 118, 11, 2, 0 ], DstAddr = 61321, Radius = 30, Options = [  ], TransId = 163, SrcEndpoint = 1 } [2023-11-07 17:59:38] ZNP: sending request: [20] FE 0F 24 01 89 EF 01 01 01 05 A3 00 1E 05 18 76 0B 02 00 97 [2023-11-07 17:59:38] CC: MT type SRSP (3), subsystem AF (0x04), command id 0x01, data: [3] 64 01 00 [2023-11-07 17:59:38] CC: MT command SRSP_AF_DATA_REQUEST, payload: { Status = 0 } [2023-11-07 17:59:38] CC: MT type AREQ (2), subsystem AF (0x04), command id 0x80, data: [5] 44 80 00 01 A3 [2023-11-07 17:59:38] CC: MT command AREQ_AF_DATA_CONFIRM, payload: { Status = 0, TransId = 163, Endpoint = 1 } [2023-11-07 17:59:39] CC: MT type AREQ (2), subsystem AF (0x04), command id 0x81, data: [28] 44 81 00 00 01 05 89 EF 01 01 00 24 00 2D CD 0A 00 00 06 01 77 00 03 00 17 89 EF 1D [2023-11-07 17:59:39] CC: MT command AREQ_AF_INCOMING_MSG, payload: { LinkQuality = 36, Data = [ 1, 119, 0, 3, 0, 23 ], SrcAddr = 61321, SecurityUse = 0, Radius = 29, ClusterId = 1281, SrcEndpoint = 1, MacSrcAddr = 61321, GroupId = 0, TransSeqNumber = 0, Timestamp = 707885, DstEndpoint = 1, WasBroadcast = 0 } [2023-11-07 17:59:39] CC: incoming message from EF89, cluster 0501, dst EP 1 [2023-11-07 17:59:39] ZB: packet from bc33acfffe619e4e: { FrameControl = [ "FrameTypeLocal", "DirectionToServer" ], TransactionSequenceNumber = 119 } [2023-11-07 17:59:39] ZB: sending ZCL message to bc33acfffe619e4e, cluster 0501: { FrameControl = [ "FrameTypeGlobal", "DirectionFromServer", "DisableDefaultResponse" ], TransactionSequenceNumber = 119, GeneralCommandFrame = { CommandIdentifier = "DefaultResponse", DefaultResponse = { Status = "SUCCESS", CommandIdentifier = 0 } } } [2023-11-07 17:59:39] CC: sending SREQ_AF_DATA_REQUEST, data: { ClusterId = 1281, DstEndpoint = 1, Data = [ 24, 119, 11, 0, 0 ], DstAddr = 61321, Radius = 30, Options = [  ], TransId = 164, SrcEndpoint = 1 } [2023-11-07 17:59:39] ZNP: sending request: [20] FE 0F 24 01 89 EF 01 01 01 05 A4 00 1E 05 18 77 0B 00 00 93 [2023-11-07 17:59:39] CC: MT type SRSP (3), subsystem AF (0x04), command id 0x01, data: [3] 64 01 00 [2023-11-07 17:59:39] CC: MT command SRSP_AF_DATA_REQUEST, payload: { Status = 0 } [2023-11-07 17:59:39] CC: MT type AREQ (2), subsystem AF (0x04), command id 0x80, data: [5] 44 80 00 01 A4 [2023-11-07 17:59:39] CC: MT command AREQ_AF_DATA_CONFIRM, payload: { Status = 0, TransId = 164, Endpoint = 1 } [2023-11-07 17:59:39] CC: MT type AREQ (2), subsystem AF (0x04), command id 0x81, data: [28] 44 81 00 00 01 05 89 EF 01 01 00 2B 00 8B 23 0B 00 00 06 01 78 00 01 00 17 89 EF 1D [2023-11-07 17:59:39] CC: MT command AREQ_AF_INCOMING_MSG, payload: { LinkQuality = 43, Data = [ 1, 120, 0, 1, 0, 23 ], SrcAddr = 61321, SecurityUse = 0, Radius = 29, ClusterId = 1281, SrcEndpoint = 1, MacSrcAddr = 61321, GroupId = 0, TransSeqNumber = 0, Timestamp = 729995, DstEndpoint = 1, WasBroadcast = 0 } [2023-11-07 17:59:39] CC: incoming message from EF89, cluster 0501, dst EP 1 [2023-11-07 17:59:39] ZB: packet from bc33acfffe619e4e: { FrameControl = [ "FrameTypeLocal", "DirectionToServer" ], TransactionSequenceNumber = 120 } [2023-11-07 17:59:39] ZB: sending ZCL message to bc33acfffe619e4e, cluster 0501: { FrameControl = [ "FrameTypeGlobal", "DirectionFromServer", "DisableDefaultResponse" ], TransactionSequenceNumber = 120, GeneralCommandFrame = { CommandIdentifier = "DefaultResponse", DefaultResponse = { Status = "SUCCESS", CommandIdentifier = 0 } } } [2023-11-07 17:59:39] CC: sending SREQ_AF_DATA_REQUEST, data: { ClusterId = 1281, DstEndpoint = 1, Data = [ 24, 120, 11, 0, 0 ], DstAddr = 61321, Radius = 30, Options = [  ], TransId = 165, SrcEndpoint = 1 } [2023-11-07 17:59:39] ZNP: sending request: [20] FE 0F 24 01 89 EF 01 01 01 05 A5 00 1E 05 18 78 0B 00 00 9D [2023-11-07 17:59:39] CC: MT type SRSP (3), subsystem AF (0x04), command id 0x01, data: [3] 64 01 00 [2023-11-07 17:59:39] CC: MT command SRSP_AF_DATA_REQUEST, payload: { Status = 0 } [2023-11-07 17:59:39] CC: MT type AREQ (2), subsystem AF (0x04), command id 0x80, data: [5] 44 80 00 01 A5 [2023-11-07 17:59:39] CC: MT command AREQ_AF_DATA_CONFIRM, payload: { Status = 0, TransId = 165, Endpoint = 1 } [2023-11-07 17:59:39] CC: MT type AREQ (2), subsystem AF (0x04), command id 0x81, data: [28] 44 81 00 00 01 05 89 EF 01 01 00 2B 00 EF 8F 0B 00 00 06 01 79 00 00 00 17 89 EF 1D [2023-11-07 17:59:39] CC: MT command AREQ_AF_INCOMING_MSG, payload: { LinkQuality = 43, Data = [ 1, 121, 0, 0, 0, 23 ], SrcAddr = 61321, SecurityUse = 0, Radius = 29, ClusterId = 1281, SrcEndpoint = 1, MacSrcAddr = 61321, GroupId = 0, TransSeqNumber = 0, Timestamp = 757743, DstEndpoint = 1, WasBroadcast = 0 } [2023-11-07 17:59:39] CC: incoming message from EF89, cluster 0501, dst EP 1 [2023-11-07 17:59:39] ZB: packet from bc33acfffe619e4e: { FrameControl = [ "FrameTypeLocal", "DirectionToServer" ], TransactionSequenceNumber = 121 } [2023-11-07 17:59:39] ZB: sending ZCL message to bc33acfffe619e4e, cluster 0501: { FrameControl = [ "FrameTypeGlobal", "DirectionFromServer", "DisableDefaultResponse" ], TransactionSequenceNumber = 121, GeneralCommandFrame = { CommandIdentifier = "DefaultResponse", DefaultResponse = { Status = "SUCCESS", CommandIdentifier = 0 } } } [2023-11-07 17:59:39] CC: sending SREQ_AF_DATA_REQUEST, data: { ClusterId = 1281, DstEndpoint = 1, Data = [ 24, 121, 11, 0, 0 ], DstAddr = 61321, Radius = 30, Options = [  ], TransId = 166, SrcEndpoint = 1 } [2023-11-07 17:59:39] ZNP: sending request: [20] FE 0F 24 01 89 EF 01 01 01 05 A6 00 1E 05 18 79 0B 00 00 9F [2023-11-07 17:59:39] CC: MT type SRSP (3), subsystem AF (0x04), command id 0x01, data: [3] 64 01 00 [2023-11-07 17:59:39] CC: MT command SRSP_AF_DATA_REQUEST, payload: { Status = 0 } [2023-11-07 17:59:40] CC: MT type AREQ (2), subsystem AF (0x04), command id 0x80, data: [5] 44 80 00 01 A6 [2023-11-07 17:59:40] CC: MT command AREQ_AF_DATA_CONFIRM, payload: { Status = 0, TransId = 166, Endpoint = 1 }

[lamgia99]

@Sral1987, did you reset and pair your device again after updating the ZigBee app?

@Zen, we are still testing Danfoss valve but from what we've seen it's not better than others. It turns out that operating mode cannot be changed - it's permanently in heating mode, so only the setpoint can be adjusted. Some improvements will be made in the next app version.

Hello admin, I am testing the Yale lock - YDM7116A_WB55 ZB3 through the zigbee 3.0 module. On Zigbee App it controls and reads the status normally. but when I assign it to the GA variable, it has no effect. Can you help me with this problem? Thank you very much!

[a455115]

Hello, everyone,

The winter season is here and I'm starting to think about putting TRV on the radiators at home. I have a LM with zigbee rs232 that I use for testing at home and the idea is to connect it to TRV. There is only one Schneider TRV in the list of supported zigbee devices, but it's not a very good looking one. Is there any alternative that already works with LM?

[admin]

@domotiqa, we don't have support for SsIasAce cluster yet. Without the actual device it will be really hard to integrate it.

@lamgia99, please provide full device info in text form.

@a455115, we are currently integrating Bosch Thermostat but it's not finished yet. Any other solutions that we've tested were unstable.

[lamgia99]

@domotiqa, we don't have support for SsIasAce cluster yet. Without the actual device it will be really hard to integrate it.

@lamgia99, please provide full device info in text form.

@a455115, we are currently integrating Bosch Thermostat but it's not finished yet. Any other solutions that we've tested were unstable.

model lock: Yale - YDM7116A_WB55 ZB3
model module zigbee : HCP-ZB3.0 T231(L- shape)
https://www.yalehome.com/vn/en/products/...r/ydm7116a
thanks you!

[admin]

In the ZigBee app click the info button and copy/paste the contents on the info window here.
   

[lamgia99]

In the ZigBee app click the info button and copy/paste the contents on the info window here.

Manufacturer: Yale
Model: YDM7116A_WB55 ZB3
 
Device type: End device
Power source: Battery
Receive when idle: No
 
Endpoint 1
 Profile: 260
 Input clusters
 - Basic (0)
 - PowerCfg (1)
 - Identify (3)
 - Alarms (9)
 - PollCtrl (32)
 - ClosuresDoorLock (257)
 - HaDiagnostic (2821)
 Output clusters
 - Time (10)
 - Ota (25)

[domotiqa]

@domotiqa, we don't have support for SsIasAce cluster yet. Without the actual device it will be really hard to integrate it.

@lamgia99, please provide full device info in text form.

@a455115, we are currently integrating Bosch Thermostat but it's not finished yet. Any other solutions that we've tested were unstable.

I can send you one as gift
send pm if so
thks

[lamgia99]

In the ZigBee app click the info button and copy/paste the contents on the info window here.

Manufacturer: Yale
Model: YDM7116A_WB55 ZB3
 
Device type: End device
Power source: Battery
Receive when idle: No
 
Endpoint 1
 Profile: 260
 Input clusters
 - Basic (0)
 - PowerCfg (1)
 - Identify (3)
 - Alarms (9)
 - PollCtrl (32)
 - ClosuresDoorLock (257)
 - HaDiagnostic (2821)
 Output clusters
 - Time (10)
 - Ota (25)

Hello admin. can you help me with this problem ?.
Thanks so much!

[admin]

Your door lock will be added into the next app version. Most likely it will be released next week.

[lamgia99]

Khóa cửa của bạn sẽ được thêm vào phiên bản ứng dụng tiếp theo. Nhiều khả năng nó sẽ được phát hành vào tuần tới.

Thank you !

[DGrandes]

Hi!

I have a Schneider Wiser Micromodule and I´m trying to add whith your RS232 Zigbee module but I can´t. I´ve seen that micromodules aren´t in zigbee list but I can see that those modules have install codes. I add it to zigbee app but doesn´t work.

How can I add this device? Its posible?

Thanks!

[Daniel]

Hi!

I have a Schneider Wiser Micromodule and I´m trying to add whith your RS232 Zigbee module but I can´t. I´ve seen that micromodules aren´t in zigbee list but I can see that those modules have install codes. I add it to zigbee app but doesn´t work.

How can I add this device? Its posible?

Thanks!

What model exactly?
Most likely you need to reset it before pairing. Press pairing button 4 times and after the forth keep pressing for 10sec till you see RED LED flashing, then pair again. No need for install code.

[DGrandes]

Hi!

I have a Schneider Wiser Micromodule and I´m trying to add whith your RS232 Zigbee module but I can´t. I´ve seen that micromodules aren´t in zigbee list but I can see that those modules have install codes. I add it to zigbee app but doesn´t work.

How can I add this device? Its posible?

Thanks!

What model exactly?
Most likely you need to reset it before pairing. Press pairing button 4 times and after the forth keep pressing for 10sec till you see RED LED flashing, then pair again. No need for install code.

Ill do dat many times. 
Device model: cct5011-0002 w50110

[Daniel]

This device works fine in my installation. Power down the zigbee interface and try again.
This device has dual firmware, one is zigbee and another is BLE. Do as I mention above only keep pressing for 20sec. It might be in BLE state.