This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.
LogicMachine Forum › LogicMachine eco-system › Gateway v
Modbus TCP problem

Threaded Mode
Modbus TCP problem
judgment Offline
Junior Member
Posts: 6
Threads: 2
Joined: Jan 2020
Reputation: 0
#1
01.04.2026, 20:14
hello please help. It seams that LM do not initiate any modbus tcp read request to modbus slave device. Tested with modbus Poll all works fine. 
Tried firmware upgrade - same issue. 
any ideas?Smile

   
   
Find
Reply
admin Offline
Administrator
Posts: 8689
Threads: 48
Joined: Jun 2015
Reputation: 497
#2
Yesterday, 10:39
See if you can ping Modbus device IP address from System config > Status > Network utilities.
Find
Reply
judgment Offline
Junior Member
Posts: 6
Threads: 2
Joined: Jan 2020
Reputation: 0
#3
Yesterday, 19:00
(Yesterday, 10:39)admin Wrote: See if you can ping Modbus device IP address from System config > Status > Network utilities.

hi tested - 4 packets transmitted, 0 packets received, 100% packet loss. Both, LM and other device i can access via http. Do you have a clue?
Find
Reply
AEK Offline
Member
Posts: 182
Threads: 12
Joined: Sep 2015
Reputation: 14
#4
Today, 06:16
(Yesterday, 19:00)judgment Wrote:
(Yesterday, 10:39)admin Wrote: See if you can ping Modbus device IP address from System config > Status > Network utilities.

hi tested - 4 packets transmitted, 0 packets received, 100% packet loss. Both, LM and other device i can access via http. Do you have a clue?

what IP settings are on LM and on your Modbus tcp device (IP, Netmask, Gateway)
Find
Reply
judgment Offline
Junior Member
Posts: 6
Threads: 2
Joined: Jan 2020
Reputation: 0
#5
11 hours ago
(Today, 06:16)AEK Wrote:
(Yesterday, 19:00)judgment Wrote:
(Yesterday, 10:39)admin Wrote: See if you can ping Modbus device IP address from System config > Status > Network utilities.

hi tested - 4 packets transmitted, 0 packets received, 100% packet loss. Both, LM and other device i can access via http. Do you have a clue?

what IP settings are on LM and on your Modbus tcp device (IP, Netmask, Gateway)

LM:                   192.168.1.3, 255.255.255.0, 192.168.1.1
Modbus device : 192.168.1.4, 255.255.255.0, 192.168.1.1


Same subnet. Both devices are reachable from my PC, and ping works 100%.
Find
Reply
admin Offline
Administrator
Posts: 8689
Threads: 48
Joined: Jun 2015
Reputation: 497
#6
10 hours ago
How are both devices connected? Switch or router? Maybe there is a firewall or port isolation is enabled.
Find
Reply


Forum Jump: