25.01.2019, 15:18
(This post was last modified: 25.01.2019, 15:19 by manos@dynamitec.)
(24.01.2019, 07:28)admin Wrote: If you are connected to LM via ETS the telegrams from grp.update will show there. Can you explain why do you need to reset object values?
I used also other IP/Router to monitor and I am still getting the values into the KNX. I want to reset them because these two G.A.s is coming with ON from a KNX button and I if 0/6/3 comes 1st with ON and then 0/7/3 with ON the script will send the value 300 and 500 into the KNX bus. So I just want to avoid of having two different scripts.
The function is simple whenever G.A. 'A' comes with ON send Y=300. And whenever G.A. 'B' comes with ON send Y=500.
(24.01.2019, 11:59)demeur Wrote: is the 0/6/3 and 0/7/3 is used by any knx device ? (trough read exemple)
if no, you can use virtual knx adress like 40/6/3 & 40/7/3
Best regard
Hello Demeur,
I know this but I want to avoid the extra time to create the Virtual G.A.s because it will be for many rooms.
Regards,