Monitoring Ness/ELK Alarm Zone Status

[jamesng]

Many thanks for the starter example. I'm still struggling a bit.

Here's an example of the data I'm receiving with the above after connecting to the alarm panel

* arg: 1
* number: 135
* arg: 2
* number: 0
* arg: 3
* number: 131
* arg: 4
* number: 97
* arg: 5
* number: 1
* arg: 6
* number: 7
* arg: 7
* number: 0

Am I correct in my interpretation that this would map to a sensor in zone / 1D 7 being triggered (event id = 1)?


Also how would I formulate an input command to retrieve the status of all 16 zones to update the group addresses in LM?

Many thanks in advance

Kind Regards
James