22.12.2020, 07:58
The issues with USB might be because you have an older CPU (i.MX28). ZeroTier is not supported on older firmware so maybe you can forward ports 22 and 80 to your LM?
|
Zigbee Test
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Zigbee Test - by tomnord - 11.12.2020, 19:10
RE: Zigbee Test - by tomnord - 13.12.2020, 20:12
RE: Zigbee Test - by admin - 14.12.2020, 07:31
RE: Zigbee Test - by tomnord - 14.12.2020, 17:01
Zigbee Test - by tomnord - 16.12.2020, 12:09
RE: Zigbee Test - by admin - 16.12.2020, 12:17
RE: Zigbee Test - by tomnord - 16.12.2020, 14:47
RE: Zigbee Test - by admin - 16.12.2020, 14:50
Zigbee Test - by tomnord - 16.12.2020, 15:29
RE: Zigbee Test - by admin - 18.12.2020, 15:22
RE: Zigbee Test - by tomnord - 19.12.2020, 07:17
RE: Zigbee Test - by admin - 21.12.2020, 07:07
RE: Zigbee Test - by tomnord - 21.12.2020, 15:24
RE: Zigbee Test - by admin - 22.12.2020, 07:58
Zigbee Test - by tomnord - 22.12.2020, 08:17
RE: Zigbee Test - by admin - 22.12.2020, 08:24
RE: Zigbee Test - by tomnord - 19.02.2021, 20:33
RE: Zigbee Test - by Daniel - 22.02.2021, 08:32
Zigbee Test - by tomnord - 22.02.2021, 08:48
RE: Zigbee Test - by Daniel - 22.02.2021, 08:49
Zigbee Test - by tomnord - 22.02.2021, 09:28
Zigbee Test - by tomnord - 22.02.2021, 15:20
RE: Zigbee Test - by stemic01 - 15.01.2022, 17:44
RE: Zigbee Test - by admin - 17.01.2022, 09:25
RE: Zigbee Test - by Muetzli - 21.01.2022, 08:33
RE: Zigbee Test - by admin - 21.01.2022, 11:17
RE: Zigbee Test - by Muetzli - 21.01.2022, 14:10
|