[OLD] LogicMachine firmware 2016.09

[admin]

RC2 has been approved as a stable release, we recommend upgrading if running an older version.

Next release with many small bug fixes and improvements, including fixes for KNX tunnelling and Modbus proxy: http://forum.logicmachine.net/showthread...53#pid1953

Make sure you have a backup file of your device prior to upgrading, downgrade to previous versions is only possible via firmware recovery.

LM2 IMX: https://dl.openrb.com/lm-16.09/lm2i.img
LM3 V1 (4 x RS-485): https://dl.openrb.com/lm-16.09/lm3v1.img
LM3 V2 (3 x RS-485 and 1 x RS-232): https://dl.openrb.com/lm-16.09/lm3v2.img
LM4: https://dl.openrb.com/lm-16.09/lm4.img
LM5: https://dl.openrb.com/lm-16.09/lm5m4.img
LM Ambient: https://dl.openrb.com/lm-16.09/lmwall.img
LM Reactor: https://dl.openrb.com/lm-16.09/reactor.img
LM Reactor V2: https://dl.openrb.com/lm-16.09/reactorv2.img
LM Reactor V3: https://dl.openrb.com/lm-16.09/reactorv3.img
LM Reactor Lite: https://dl.openrb.com/lm-16.09/rctl.img

Patches and package updates:

1. Important update: fix random group addresses appearing during KNX device programming and missing KNX/TP telegrams.
Install through Logic Machine -> Utilities -> Install updates:
https://dl.openrb.com/lmup/2016.12.23-knx_fix_mxs.lmup

2. (only needed if running RC2 version) Cannot send e-mail using secure connection (e.g. Gmail).
Install through System Config -> Packages:
https://dl.openrb.com/lm-16.09-rc2/libwo...-1_mxs.ipk


LM Load Balancer: https://dl.openrb.com/lm-16.09-rc2/lb.img

Patches and package updates:

1. Cannot send e-mail using secure connection (e.g. Gmail).
Install through System Config -> Packages:
https://dl.openrb.com/lm-16.09-rc2/libwo...-1_x86.ipk