These values should change all the time as it's solar production and energy consumption.
What I want to monitor is real time (5-10s interval) data coming from the inverter and Smart Energy Meter so I can make a dashboard on the visu and maybe in the future actions depending on production or consumption.
this is the log:
What I want to monitor is real time (5-10s interval) data coming from the inverter and Smart Energy Meter so I can make a dashboard on the visu and maybe in the future actions depending on production or consumption.
this is the log:
Code:
Wiser for KNXLogoutStart pageLanguage:
English
1
Version: 2.5.1
CPU/IO: 0.12 0.06 0.08, Memory: 21%, KNX/TP: OK
* table:
["Current_AC_Phase_1"]
* number: 1.312
["PowerReal_P_Phase_1"]
* number: 190.8
["PowerFactor_Phase_1"]
* number: 0.796
["PowerReal_P_Sum"]
* number: -53.6
["Current_AC_Sum"]
* number: 0.434
["PowerFactor_Phase_3"]
* number: 0.328
["PowerReal_P_Phase_2"]
* number: -283.6
["PowerReactive_Q_Phase_3"]
* number: -112.7
["EnergyReactive_VArAC_Sum_Produced"]
* number: 614904
["Current_AC_Phase_2"]
* number: -1.412
["PowerApparent_S_Sum"]
* number: 654.4
["TimeStamp"]
* number: 1619170026
["Voltage_AC_PhaseToPhase_23"]
* number: 416.4
["EnergyReal_WAC_Sum_Produced"]
* number: 176646
["PowerFactor_Phase_2"]
* number: -0.961
["Current_AC_Phase_3"]
* number: 0.534
["PowerFactor_Sum"]
* number: -0.156
["PowerReactive_Q_Phase_2"]
* number: -81.9
["Voltage_AC_Phase_2"]
* number: 240.5
["EnergyReal_WAC_Minus_Absolute"]
* number: 176646
["Meter_Location_Current"]
* number: 0
["Voltage_AC_Phase_3"]
* number: 238
["EnergyReactive_VArAC_Sum_Consumed"]
* number: 1143
["Voltage_AC_Phase_1"]
* number: 238.7
["PowerApparent_S_Phase_2"]
* number: 295.2
["EnergyReal_WAC_Sum_Consumed"]
* number: 602167
["Visible"]
* number: 1
["Voltage_AC_PhaseToPhase_31"]
* number: 412.8
["Voltage_AC_PhaseToPhase_12"]
* number: 412.8
["Frequency_Phase_Average"]
* number: 50
["PowerApparent_S_Phase_3"]
* number: 119.3
["Details"]
* table:
["Manufacturer"]
* string: Fronius
["Model"]
* string: Smart Meter TS 65A-3
["Serial"]
* string: 1987314142
["Enable"]
* number: 1
["PowerReactive_Q_Sum"]
* number: -339.9
["EnergyReal_WAC_Plus_Absolute"]
* number: 602167
["PowerApparent_S_Phase_1"]
* number: 239.7
["PowerReactive_Q_Phase_1"]
* number: -145.1
["PowerReal_P_Phase_3"]
* number: 39.2
Novice DIY with a HL and KNX basics trying to ...