Tulikivi sauna heater relay board

[admin]

Try this:

Code:

require('serial')
port, err = serial.open('/dev/RS485', {
  baudrate = 9600,
  databits = 8,
  stopbits = 1,
  parity = 'none',
  duplex = 'half'
})

function send(cmd, data)
  local msg, res, err, b1, b2

  data = data or 0

  msg = string.char(
    bit.band(cmd, 0xFF),
    bit.band(bit.rshift(data, 8), 0xFF),
    bit.band(data, 0xFF)
  )

  port:flush()
  port:write(msg)

  res, err = port:read(2, 3)
  if type(res) == 'string' then
    if #res == 2 then
      b1, b2 = res:byte(1, 2)
      return bit.bor(bit.lshift(b1, 8), b2)
    else
      return nil, 'invalid reply'
    end
  else
    return nil, err
  end
end

-- turn on
res, err = send(1, 1)
log(res, err)

-- turn off
res, err = send(1, 0)
log(res, err)

-- read current temperature
res, err = send(15)
log(res, err)