10.10.2021, 08:18
(05.10.2021, 07:13)admin Wrote: Temperature warning is another indication of an overloaded line. It's not guaranteed to appear though. The more devices are on the KNX line the harder it is to transmit data. This leads to the chip overheating and/or not being able to transmit at all (send 0 receive 1 error).
does it mainly depends on amount of devices only, or mainly on number of telegrams going through? i.e. does it gets harder to transmit on the line with 100 devices with 10 telegram/sec load, or 50 devices with 30 telegrams/sec ?
thanks for clarification