17.08.2022, 18:45
(This post was last modified: 17.08.2022, 19:24 by Rauschentofft.)
Thank you very much for the help.
Hi again.
Is it possible to have a slave input to retrigger the timer when it is active?
1/1/1 Trigger Staircase 1bit
1/1/2 Output 1byte
1/1/3 Slave Input
Set Value High 90%
Set Value Low 20%
Set Value Off 0%
Set Timer 1 = 10min
Set Timer 2 = 20min
Hi again.
Is it possible to have a slave input to retrigger the timer when it is active?
1/1/1 Trigger Staircase 1bit
1/1/2 Output 1byte
1/1/3 Slave Input
Set Value High 90%
Set Value Low 20%
Set Value Off 0%
Set Timer 1 = 10min
Set Timer 2 = 20min