16.01.2023, 23:23
Hi all,
It was due to a bad power supply that I did not manage to get Dali working.
Dali 2 is fully supported on older LogicMachine devices by sending raw commands on the bus. I was able to set the color temperature of a Dali Device Type (DT) 8.
Thank you for the wonderful products you build, it was a delight to work with the Dali internal gateway as defined in https://openrb.com/docs/dali.htm
It was due to a bad power supply that I did not manage to get Dali working.
Dali 2 is fully supported on older LogicMachine devices by sending raw commands on the bus. I was able to set the color temperature of a Dali Device Type (DT) 8.
Thank you for the wonderful products you build, it was a delight to work with the Dali internal gateway as defined in https://openrb.com/docs/dali.htm