21.09.2023, 05:59
(21.09.2023, 05:15)admin Wrote: DALI color temperature control is already supported by CANx-DALI. The only difference with DALI 2 is how the ballast feature detection works. But then the ballast should only have a single DALI address. Maybe it can be configured? We have a Meanwell ballast that can be switched between single and dual address mode via a physical switch.
You can check the ballast type/mode by sending querydevicetype command in CANx-DALI monitor to the ballast short address. What value do you get?
72
07:58:38.656
RX
16 78 B9 05 6A 26 CE F5
0.1 DALI gateway (internal)
11 06
ACK; DATA = 06
71
07:58:38.621
TX
16 78 B9 05 6A 26 CE F5
0.1 DALI gateway (internal)
50 FF 99
BCAST; CMD = querydevicetype (153