integración modbus rtu con EASTRON SDM120

[german.cespedes@ecoelec.cl]

hi,

I am new to this forum and I need your help to integrate an EASTRON SDM120 power meter with a spacelink (LSS100200). According to what has been said in the manuals I must create a profile with the data and variables modbus, which is realistic but it does not seem the only thing that needs to be done and that it did not obtain good results. I have read the forum and everything I need to create besides a profile "functions". I will appreciate if I can guide a little to know what I should do more clearly.

register Modbus  https://drive.google.com/a/kuniungen.com...sp=sharing

Then leave the profile you create.

{
"Product_code": "SDM120",
"Fabricante": "Eastron",
"Name": "SDM120",
"Product_range": "PM",
"Descripción": "SDM120 Medidor de energía",
"mapeo": [
{ "name": "Frecuencia", "bus_datatype": "float32", "tipo": "registrar", "dirección": 30000},
{ "name": "Voltaje", "bus_datatype": "float32", "tipo": "registrar", "dirección": 30071}
]
}



Regards