21.02.2017, 18:35
(20.02.2017, 18:34)mlaudren Wrote: Hi,
Crestron use a proprietary protocol.
And they have gateway to other protocols like cresnet-KNX, crestnet-modbus, ...
You could use a crestnet-knx gateway for this. our maybe by ethernet, but I'm not sure you have an open API on the processor...
The point here was to use LM4 as a Crestron --> KNX gw, so that you don`t have to buy both :
So make a connection from Crestron to LM via TCP/IP and read/write to Groupadresses in KNX.
Has this been done?