22.07.2024, 15:50
(This post was last modified: 22.07.2024, 15:57 by legolas2069.)
Hi!
I have deleted the previous message because it was not entirely clear. admin, thanks for the help, but I'm late because I had already made all the objects, and changing them now would be cumbersome.
I'll try to explain it:
I have 160 lights. Each of these luminaires will have 3 operating modes, as if they were DALI groups, and the user will be able to assign the group as needed (only 1 group for each luminaire). Next, when the user wants to turn on the luminaires of a group, the system will have to know which group those luminaires belong to, and turn on the corresponding ones.
Thanks in advance for your help.
I have deleted the previous message because it was not entirely clear. admin, thanks for the help, but I'm late because I had already made all the objects, and changing them now would be cumbersome.
I'll try to explain it:
I have 160 lights. Each of these luminaires will have 3 operating modes, as if they were DALI groups, and the user will be able to assign the group as needed (only 1 group for each luminaire). Next, when the user wants to turn on the luminaires of a group, the system will have to know which group those luminaires belong to, and turn on the corresponding ones.
Thanks in advance for your help.