This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

Help with Shunt Control in LM5 – Outdoor Temperature and Supply Temperature
#1
Hi,

I need assistance in developing a basic shunt control function in Logic Machine 5 for a radiator system. The first version should use the supply temperature on the secondary side along with a heating curve based on the outdoor temperature.

The system includes the following components:
- Actuator for shunt control
- Circulation pump
- Supply temperature sensor on the secondary side
- Outdoor temperature sensor

I’m also open to suggestions for other solutions or optimizations that could improve the system’s efficiency. If anyone has experience with this setup and can share scripts, examples, or recommendations, I would really appreciate it!

I’m interested in hiring someone to develop this shunt control script/function for Logic Machine 5. If you have the relevant experience and are available for freelance work, please feel free to contact me with your rates and availability.


Skickat från min iPhone med Tapatalk
Reply


Messages In This Thread
Help with Shunt Control in LM5 – Outdoor Temperature and Supply Temperature - by anve - 07.09.2024, 14:34

Forum Jump: