communication between wiser for knx, smartmeter 85A and actuator interra 8Ch

[Fistel]

If both values are already mapped to group addresses then you need an event script attached to the meter data output group address.

This example will send true (ON) to 1/1/2 when the input value is larger than 100, false (OFF) otherwise.

Code:

value = event.getvalue()

if value > 100 then
  output = true
else
  output = false
end

grp.write('1/1/2', output)

thanks for the reply

now, i just have programs in ETS application for smartmeter 85A (he give active power measured) and actuator. How to link all of them, so that they can send data each other ?