21.07.2025, 10:04
1. Don't modify value_bitmask, change the SELECT statement to look for a specific value_bitmask if specified.
2. Remove quotes around hexadecimal numbers (0x01 instead of "0x01").
3. value_custom = "rfid"[/b] is not a valid custom value.
4. If you have multiple Modbus devices then all devices with matching registers will be mapped to the same group address.
2. Remove quotes around hexadecimal numbers (0x01 instead of "0x01").
3. value_custom = "rfid"[/b] is not a valid custom value.
4. If you have multiple Modbus devices then all devices with matching registers will be mapped to the same group address.