This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

How to control the KNX bus via SMS and send notices via SMS?
#54
(08.08.2025, 14:40)admin Wrote: Unfortunately the modern does not provide any useful error information. Have you tried sending messages using this SIM from a phone? Script only supports 7 bit alphabet so make sure that your message only contains latin letters without diacritics.

I borrowed an ordinay SIM card from a friend which is using another mobile operator and with all features open - both data, talk and SMS. That worked fine for sending SMS, so it must be something with the SIM card or operator settings. Nothings happens when I am trying to send a SMS to the modem to change a GA though, but I will deal with that later. Now I must return the borrowed SIM card and talk to operator about settings for my current SIM card.

Thanks for all your support, which is much appreciatedĀ  Heart
Reply


Messages In This Thread
RE: How to control the KNX bus via SMS and send notices via SMS? - by EjvindHald - 10.08.2025, 11:39

Forum Jump: