This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

ZigBee-Modbus-Relay
#1
Wired is inconvenient, wireless is unreliable. What if you could combine the best of both worlds?

We present ZigBee-Modbus-R1 a unique device designed to solve this very problem. It's a hybrid
relay that simultaneously supports both the wired Modbus RTU interface and the wireless ZigBee
network. This allows you to create truly flexible and fault-tolerant control systems.

Key Features:

Flexible Installation: Use the ZigBee wireless protocol where running cables is impossible or not cost-effective.

Industrial Reliability: Rely on the time-tested Modbus wired protocol for mission-critical parts of your system
where stability is paramount.

Maximum Fault Tolerance (Failover): Activate both interfaces simultaneously. In case of a failure on one network
(e.g., a cable break or strong radio interference), the device remains controllable via the second network,
ensuring uninterrupted operation.


Our project is fully open-source. You are free to study, modify, and use our work.

Source code and schematics on GitHub:
https://github.com/LogicMachineEMBS/Zigbee-Modbus-Relay


Reply


Messages In This Thread
ZigBee-Modbus-Relay - by RomansP - 24.10.2025, 09:01

Forum Jump: